Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 57T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 57T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Billet Burst Panel Deflector
Supercharger back-fire is something we all try to avoid at almost any cost... However in the event of one, why not attempt to prevent as much damage as possible, right! And that leads us to this Billet Burst Panel Deflector that installs easily and could possibly help prevent costly body or hood damage! It's durable, light weight and machined from billet aluminum and works with the standard size, 24 bolt burst panel frame. And can be installed to deflect debris or manifold pressure up or down depending on what type of race car you're running. Pair one of these up with a Nomex Plug Wire Saver for a little more added protection... Then drop the hammer!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Another BRAND NEW item... Without the brand new price!!!
Flatout 426 Hemi Head Gaskets - 4.375
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Flatout 426 Hemi Head Gaskets - 4.375 for all you racers out there running fatheads! These are the copper style, for the 4.375 bore, that are available in .90, .95, .100 or .105 thickness and are ready to ship out right after you order them... It's easy, just click, then they ship!
Choose your thickness in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Titanium Quick Change Bottom Pulley Nut
This slightly Used RCD Titanium Quick Change Bottom Pulley Nut is the one item responsible for making the whole process "quick" and easy! This one's in very nice shape and works with the splined style bottom blower pulleys. And allows your team to make a last minute pulley swap in the lanes just before you're ready to fire! It works in conjunction with your RCD threaded style crank hub and can be used with pulley spacers if you choose. It's durable light weight and ready to visit the winners circle!
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak 8 Magnet Split Collar
This brand new Racepak 8 Magnet Split Collar works with the popular Pro 3, or 3A, Pro 2, Pro 1B, or Pro 1A data loggers. It's made of light weight aluminum, anodized black and available in several different sizes. It measures .375" wide and equipped with 8 magnets for optimum accuracy that trigger your drive shaft or rear end coupler sensor to help send RPM data to your data logger. The road to the winners circle may be shorter than you think! GoNitrolink.com
Please choose the size needed in the "options" menu below.
Another BRAND NEW item... Without the brand new price!!!
System 1 Oil Filter
Looking out for our valued customers is what we do best! So, lets save you some money right here by offering this brand new System 1 Oil Filter with a nice discount! This one's the inline style, designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. This one's set up to works with nitromethane and equipped with the larger AN-20, fitting size on both ends. The filter itself measures 9" long, is anodized red and ready to go racing out of the box! This exact set-up goes for right at $250 bucks... And is the only one available at this price! Save more, Race more, Win more... GoNitrolink.com
