Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
ISP CarbonX Seat Kit
Now here's the perfect item for the "do it yourself" racers out there looking to save some hard earned cash! This ISP CarbonX Seat Kit comes complete with everything you need to pour your own custom seat to mold around your driver specifically. The fingerprint style allows for your driver to be placed in the seat the same way each and every time. It offers added comfort and could help with improving reaction time. It's poured with your driver sitting in the race car fully suited up. Seat kit contains: 2 part mix, stirrer, seat bag, 1/4" sheet of foam, duct tape, double sided tape, complete step by step instructions and CarbonX outside cloth with provision for head and neck devices. Now you're ready for the weekend!
Price
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Total
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Another BRAND NEW item... Without the brand new price!!!
New U.S. Gear Ring & Pinion Set
"Supercharged Savings" right here at GoNitrolink.com with this New U.S. Gear Ring & Pinion Set. And if you're looking for a Pro Gear with a 4.11 ratio, then get ready to save some hard earned cash! This one works with your 9.5" size ford style rear ends and is brand new and ready to install. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And check out the racer friendly price tag on this new product... Click on "buy now" before it's gone!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Stealth Coated Titanium Intake Valves
Our website makes it simple to replenish your spare parts inventory and save a bundle on select items not having to buy new elsewhere! And here's a set of slightly Used Stealth Coated Titanium Intake Valves with another budget friendly price tag, to keep a little extra money in your pocket, for a change! This set of 8 titanium valves measure 2.450 diameter, with a 5.620" length. And are equipped with a 11/32" stem and a .250 tip, with a beadlock groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Save money, save time, GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
New 426 Hemi Coated Nitro Pistons
Are you ready to score big time on a set of (10) New 426 Hemi Coated Nitro Pistons made by Diamond Pistons. And if you're looking for the 4.187 bore size then it's your lucky day! This complete set, plus two spares is ready to accept your 1.156" pin size, with a 1.600 compression height and standard ring grooves. This style piston can be used in Nostalgia Funny Car, Fuel Altered, or Drag Boat applications. We only have one set available, so click on "buy it now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson 10' Skyjacker "Sportsman" Chute
Check out this BRAND NEW Simpson 10' Skyjacker "Sportsman" Chute for use on your alcohol, or gas burning Dragster, Altered, Super Comp Dragster Pro Gas Doorslammer, Show Car, or ??? This one's the Sportsman 10' Crossform model with the black nylon pack for all cars up to 200 MPH. It's equipped with the nylon lines commonly used on the sportsman style Chutes, instead of the heavier 3/4" size lanyard straps that are used on the heavier duty Nitro/Alcohol Chutes. Canopy colors come in red, blue, or black. And it comes complete with a pack, aluminum back-plate and pilot chute included for a complete package. Release cable not included. So here's the perfect opportunity to replace that old worn out Chute you're currently running on your race car. Or, grab one up for spare!
Choose either Red, Blue, or Black in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
Another BRAND NEW item... Without the brand new price!!!
CP 426 Hemi Coated Nitro Pistons
How about another brand new product, without the brand new price tag! This set of (10) brand new CP 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.715 compression height. Ring groove sizes are as follows:
Top = .0745, Second = 1/16", Oil ring = 3/16" size. We only have one set available, so click on "buy now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
CP Carrillo 426 Hemi Coated Nitro Pistons
Lets showcase another brand new product, without the brand new price tag! This set of (10) brand new CP Carrillo 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.620 compression height. Ring groove sizes are as follows:
Top = 1/16", Second = 1/16", Oil ring = 3/16" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Save, Race, Win, Repeat! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Other Compression Heights Available. Call: (916) 425-1427 for details.
