Price
$35.50 – $88.00Price range: $35.50 through $88.00
Total
$35.50 – $88.00Price range: $35.50 through $88.00
We offer a complete line of all Taylor Motorsports Products!
Absorbent Diaper Liners
"Nitrolink" is you're one stop shop for consumables as well... So, lets offer these handy Absorbent Diaper Liners available in 2 sizes, for Funny Cars or Dragsters. They come equipped with velcro strips at the top for easy installation or removal on both sides of the diaper. They're sold by the pair and work great with the small absorbent pillow (sold separately) that fits on the bottom of the diaper for a complete package. Don't risk being shut off at the line because of a couple small drips... These could possibly help!
Choose size needed in the "options" menu below.
Absorbent Pillow price includes 1 total.
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
We offer a complete line of all Taylor Motorsports Products!
Nomex Plug Wire Saver
The last thing you want to have happen during qualifying, or when you're going rounds on race day is for the Blower to backfire. So, with that in mind "Nitrolink" offers this brand new Nomex Plug Wire Saver to possibly help save that set of plug wires you just installed on your race car. This handy item installs quickly and easily over your set of plug wires in the area in front of, or under the burst panel to give them extra added protection. No rocket science here, just a great idea to take advantage of just in case!
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson CarbonX Driver Headsock
Quality and comfort is offered right here with this brand new Simpson CarbonX Driver Headsock for one more layer of extra added protection on race day! This one's NHRA "tech friendly" with SFI 3.3 tags and fits any full face helmet contour. It's CarbonX base layer is moisture wicking and it comes in your choice of either the dual eyeport opening in black, or single eyeport opening in either black or white. Order top quality drivers equipment 24/7 right here at: GoNitrolink.com
Both styles are also available in Nomex material if you prefer for the same price.
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson CarbonX Driver Socks
Attention All Drivers!!! Both top of the line quality and comfort are offered right here with a brand new pair of Simpson CarbonX Driver Socks for more extra added protection on race day. These come complete with SFI 3.3 tags and are knitted from patented CarbonX yarn and flame-resistant, super-washed merino wool. They're equipped with a reinforced toe, heel and cushioned sole for extra durability. And available in one color black, with one size fitting most. Drivers helping Drivers do what they do best! GoNitrolink.com
We offer a complete line of all Simpson Race Products!
Simpson Chin Strap
Help equalize those g-force effects right at the step with a brand new Simpson Chin Strap just like this one!!! This is the newest style, that's black in color and made of nylon. It's now equipped with a handy quick disconnect clip that allows it to be removed from the helmet instead of always hanging permanently off of it like the old style. Attach the opposite side to your safety harness, quickly adjust as desired, then drop the hammer... Save more, race more, win more! GoNitrolink.com
Price
$49.95 – $95.59Price range: $49.95 through $95.59
Total
$49.95 – $95.59Price range: $49.95 through $95.59
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson Nomex Driver Headsock
Quality and comfort is offered right here with this brand new Simpson Nomex Driver Headsock for one more layer of extra added protection on race day! This one's NHRA "tech friendly" with SFI 3.3 tags and fits any full face helmet contour. It's Nomex base layer is moisture wicking and it comes in your choice of either the single, or dual eyeport opening in either white or black. Order top quality drivers equipment 24/7 right here at: GoNitrolink.com
Both styles are also available in CarbonX material if you prefer for the same price.
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
We offer a complete line of all Taylor Motorsports Products!
Taylor Engine Diapers
For the best fit and lightest on the market, choose Taylor Engine Diapers to get the job done right the first time! These lower engine restraints meet or exceed SFI 7.1 specs and are custom made to fit your engine tightly. Unlike some of the "one size fits all" units that are offered elsewhere, these were designed to install easily or be removed quickly. And are equipped with removable absorption liners that can be replaced in a flash. Order yours today with either an oil repellent nylon, or upgraded light weight kevlar outer shell... Then start loading up for the next race!!!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Taylor Motorsports Products!
Taylor Supercharger Restraint
If you're looking for unmatched quality that's second to none when it comes to Blower Restraints, then take a look at one of these Taylor Supercharger Restraint set-up's designed to fit any 6-71 to 14-71 Supercharger on the market. Available in either SFI 14.2 or SFI 14.3 spec, these blower bags are made of kevlar inside with a nomex outside. Injector straps, top blower restraint plate with straps, bottom manifold plate, 4 header brackets, 1 bell housing bracket, and 5 bracket pins, are also included to wrap up this very special package. Custom made for Nostalgia Top Fuel or Nostalgia Funny Cars running a 6-71 Blower, all the way up to Top Fuel Dragsters and Nitro Funny Cars running the 14-71 size. Quality and craftsmanship right here, so come and get it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Taylor Motorsports Products!
Taylor Transmission Blanket
If you've been shopping around for this next item, then keep in mind a proper fit is key to a long lasting component that will provide years of service if maintained properly... This Taylor Transmission Blanket is quality craftsmanship at it's finest! It's durable construction, both inside and out are sure to meet all you're expectations. It's NHRA "tech friendly" with SFI 4.1 tags and can be ordered to fit all Lenco CS-1, or CS-2, (2, 3, 4 or 5 speed) transmissions. As well as B&J 2 speed, or big boy 3 speed transmissions. All are equipped with handy grip handles on each end for easy transmission installation or removal in between rounds. And can be ordered in either an oil repellent nylon or upgraded light weight kevlar outer shell... One more quality product, for your quality race team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
