IN STOCK & READY TO SHIP!!!
AJPE 426 Hemi Billet Block
The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...
And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!
Priced to move at Only: $5595. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Tray in photos not included.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Alan Johnson 392 Hemi Blower Manifold
Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson 426 Hemi Rocker Assembly
Probably one of the most popular hard to find Hemi items would be a top of the line complete Alan Johnson 426 Hemi Rocker Assembly. This hi-ratio set with Alan Johnson billet stands and upgraded Titanium Shafts is loaded with a BRAND NEW set of Stage 5 (1.75 ratio) Intake Rockers. And a slightly used set of Cluff (standard ratio) Exhaust Rockers. All Rockers are equipped with the larger size 7/16" adjusters with the 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. All Stands, Shafts, Adjusters & Nuts are in great shape with no damage. And all shims & springs are brand new and included as well. This set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc:) these will not adapt to your application.
Brand new price to duplicate everything you see here is going to set you back over $9500 Bucks!!! But not here... Not today! This complete set-up is definitely some of the best equipment money can buy for strength, durability and performance. And ready to install right out of the box and go racing... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson Stage 1 Nostalgia Cylinder Heads
Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $4500.00 set.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson Stage 5 Billet 426 Hemi Heads
Check out this nice set of Alan Johnson Stage 5 Billet 426 Hemi Heads perfect for use on your Top Fuel Dragster, Nitro Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on. This slightly used set is in excellent shape and works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your standard deck fuel head style manifold. They're the .100 tall style and accept your 2.450 size intake and 1.925 exhaust valves, (not included). Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are already machined for o-rings and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Why Buy New??? So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $2195.00
Aluminum Fuel / Oil Funnel
Another "Nitrolink" high quality product that's made to last! This brand new heavy duty Aluminum Fuel / Oil Funnel was specifically designed to meet the high demands of the professional race team! It's large 11" diameter makes it excellent for refueling your race car with nitro, alcohol, or gas, quickly and efficiently. And it works equally as well with heavy weight racing oil. Funnel measures 16" tall, with a 6" spout that can easily be cut down to your specifications if desired. Pair it up with one of our handy fuel filter bonnets to assure a clean pour. If you pay close attention to all the details, then this item is sure to deliver that professional image you're looking for!
Priced to move at: Only $109.95
Price
$445.00 – $620.00Price range: $445.00 through $620.00
Total
$445.00 – $620.00Price range: $445.00 through $620.00
We offer a complete line of all Pit Pal products!
Aluminum Loading Ramps
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And check out the craftsmanship on this brand new set of Aluminum Loading Ramps that are ready to make your life a whole lot easier on race day! They're offered in 3 different sizes: 36" long, 60" long, or 72" long x 14" wide. All are made from sturdy .125 aluminum Tig-welded A-shaped channel and are sold as a pair. They have a fabricated height of approx. 4 inches. And feature traction embossments, heavy duty hinges that are zinc-yellow plated and rivets. And flip up easily when not in use... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Please note: Due to the size of this product, please call: (916) 425-1427 before you order so we can go over the best shipping options.
We offer a complete line of all Pit Pal products!
Aluminum Pit Table
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, check out this brand new Aluminum Pit Table that's offered in 3 different sizes to make sure we have you covered for the race weekend! All are sold separately and considered one of the strongest work tables in the industry. They're made of .125 aluminum and have a 1,000 lb. weight capacity. And equipped with tubular steel locking legs that fold flat for easy storage... See us for all your Pit Pal needs! GoNitrolink.com
Small size: $388.80 - 42"L x 25"W x 31"H when open. 36 lbs.
Medium size: $432.00 - 64"L x 25"W x 31"H when open. 48 lbs.
Large size: $514.10 - 72"L x 31"W x 31"H when open. 65 lbs.
Please note: Due to the size of this product, please call: (916) 425-1427 before you order so we can go over the best shipping options.
Price
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Total
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Aluminum Vise Jaws
The job of building new hose lengths for your race car just became a whole lot easier! Using a set of Aluminum Vise Jaws to hold everything in place while your working can make all the difference. This set is magnetic so they work with most style bench vises, measure 4" long and help protect hose ends during assembly. And could even prevent scratches if used carefully. Another small item that could help when you're organizing!
Color may vary.
Price
$125.30 – $249.00Price range: $125.30 through $249.00
Total
$125.30 – $249.00Price range: $125.30 through $249.00
We offer a complete line of all Pit Pal products!
Aluminum Wheel Chock
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's offer a brand new Aluminum Wheel Chock to help keep your ride even more secure during transport! This one's made of durable aluminum and completely box-welded for added strength. It's sold separately, or as a pair for an even better deal. And works in conjunction with your ratchet tie down straps on either front or rear tires. It features a handle in the back for easy carrying and measures 6.25"H x 9.875"W x 11.675"D. Plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Sold separately, or as a pair. Choose your preference in the "Options" menu below.
