Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Bearing Scraper Tool
Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
Valve Lapping Sticks
Or, if you prefer to keep everything old school, then "Nitrolink" is here to help with one of these brand new Valve Lapping Sticks to make sure you're ready for the next round! No rocket science here, just a good quality tool that's comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8" long and comes equipped with a small and large, (1 1/8" and 1 3/8") cup on each end. Specialty pit tools available 24/7 right here on our website!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Blower Starter Bracket
If you're running a blower starter, then it certainly pays to keep all the other little related components in good shape to insure your car fires up every time! So, check out this slightly Used RCD Blower Starter Bracket that's almost new and ready for action! It's made of light weight billet aluminum and in excellent shape with no damage or repairs. This one's designed to works with the SSI, or Kobelco superchargers and can definitely help prevent a lot of grief on the starting line when it comes to installing or removing your blower starter quickly and efficiently. It never hurts to prepare, order this one for a spare!
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
"Nitrolink" offers a complete line of all Moore Performance Products!
Moore Performance Reverser
Quality craftsmanship, durability and performance!!! This state of the art brand new
Moore Performance Reverser checks all the boxes in these 3 categories... And here's the proof! This is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! Lets start with the sleek looking, finished billet aluminum case. This low profile design is anodized black and the lightest available on the market. And can be ordered with a bellhousing style, or cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
