IN STOCK & READY TO SHIP!!!
Used Blower Starter
Here's another quality component for all our valued customers on a budget! And when it comes to "go time" on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It's in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you're ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website... Just a couple clicks... Done!
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Used PSI Set-Back Blower Snout & Coupler
When it comes to state of the art superchargers and components, PSI delivers unmatched quality and craftsmanship! And this slightly Used PSI Set-Back Blower Snout & Coupler is a perfect example! It works in conjunction with your PSI roots style supercharger that sits on top of your set-back style blower manifold. It's measures 11 1/2" long flange to flange and mounts to your front cover with 12 total 5/16" size bolts (not included). It's o-ring equipped on one side for a secure seal and utilizes the standard blower pulley bolt pattern on the other. The slotted area in front was designed to work with your snout clamp style belt guard (sold separately). And the steel shaft and coupler are also included to complete the package. This is the last one we have so if you don't want to buy new, then here's your chance to save... Order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
Manifold Lapping Plates
Keep that supercharger on your race car performing at it's best with one of the nicest Manifold Lapping Plates on the market to help keep it flat and true! This heavy duty high quality specialty tool is brand new and the perfect item to have at your race shop, or in your pit area on race day to help your manifold provide a nice even surface for a complete seal. This one's made of billet aluminum and comes complete with 1 disposable self adhesive sheet of sand paper. (Extra sheets sold separately). It measures 1" thick and is equipped with 2 comfortable handles to help deliver a consistent result. It stores away nicely in your race trailer or shop and ready to go to work right when you need it most! Top quality right here! GoNitrolink.com
Extra sheets of sand paper are also available right here on our website.
Price
$155.00 – $175.00Price range: $155.00 through $175.00
Total
$155.00 – $175.00Price range: $155.00 through $175.00
"Nitrolink" offers a complete line of all Littlefield Supercharger products!
Billet Idler Pulley Assembly
If you're looking for a Billet Idler Pulley Assembly that checks all the boxes when it comes to performance, durability and craftsmanship, then take a look at this style made by Littlefield. This one's brand new and works with your 3" wide blower belt and available in either the small or large diameter size. It's manufactured from billet aluminum and profiled for a true finished look. It offers both strength and reliability on the race track and can work in conjunction with many of the popular roots style superchargers on the market. And was specifically designed to help prevent belt slippage at the most critical time during the run! Quality racing components 24/7 right here on our website!
Choose either small, or large diameter in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Starter Cables
Let's offer some more starting line equipment, to make sure we have you covered on race day! Check out this nice set of Used Blower Starter Cables that are ready to join your race team immediately! This set measures 10 feet long and could work well on the starting line if your using a remote battery pack that sits close to the car. They come complete with a black protective cover to help prevent cable damage. And the great news is, they're also equipped with the black, universal style anderson plugs that interchange with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. Quality racing components offered 24/7 right here on our website! GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
