Dual Feeler Gauge Handles
It's all about choices for our valued customers! So, here's one more style of billet Dual Feeler Gauge Handles to consider if you prefer using the small style that holds 2 separate gauges on the same handle. They're strong, durable and made of billet aluminum to help run thru a set of valves quickly without having to fumble with 2 separate gauges . They measure 3" x 1.25" x .5" total and can accept various sizes of 1/2" wide feeler gauges (not included) depending on your application. They're sold separately and can be stacked 3-4 gauges high if you choose. Ordering made simple, 24/7 right here on our website! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Piston Ring Compressors
Easy installation with precision accuracy is what you'll find right here with these Piston Ring Compressors that are sold separately and offered in all the popular sizes to make sure you're covered on race day! This high quality tool is anodized black and made from aircraft quality 6061T6 heat-treated aluminum and then hard anodized for a long life. All ring compressors are machined with a step at the bottom to clear block o-rings when used. And are a must have for getting the job done quickly and efficiently... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose bore size needed in the "options" menu below.
Hemi 392/Rodeck Main Bearing Engine Kits
Attention all racers out there running the popular 392 Hemi... Now you know exactly where to go to get your brand new, hard to find Hemi 392/Rodeck Main Bearing Engine Kits right before the busy race weekend! These are made by King Bearings and are the standard, non-coated style that includes: 1 upper and 1 lower thrust bearing. And 1 complete set of upper and lower main bearings. These kits are sold separately and can be used on 392 nitro, alcohol, or gas engines... Order all your racing consumables 24/7 right here! GoNitrolink.com
Kevlar Hot Sleeve Arm Covers
Show your bottom end crew member you appreciate their efforts in between rounds with these handy Kevlar Hot Sleeve Arm Covers to help protect their arms while working around a hot engine. They come in black, are sold separately and made of durable, heat-resistant Kevlar® and work on either the right or left arm. They're one size fits all and machine washable so they'll be fresh and ready to go for each event. And can be ordered as a pair if you choose... Racers helping Racers do what they do best! GoNitrolink.com
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Silver Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Silver Rocker Stands are the hi ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
XRP Wiggens Style Cap
If you're using XRP & Wiggens products together on your race car, then lets offer some of the select components you'll need to get the job done... And we'll save you some money at the same time! This brand new XRP/Wiggens Style Cap is typically used to cap off your -12 oil pump fitting on the oil pump side, or can be used for other applications as well. And helps prevent leaks while your servicing your oil system in between rounds. Popular with many of the pro nitro and alcohol teams on tour, these products working together save time in the pits, offer a secure fit and help streamline your operation!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Oil Pan Nuts
If you're running a AJ, Brad, or Keith Black block and are looking for a great deal on a complete set of brand new Hemi Oil Pan Nuts then look no further! These sets are made of durable steel, zinc coated and can be ordered in either the 5/16" -24 fine thread size, or the 5/16" -18 coarse thread size. And both come with a serrated flange for a secure fit. This popular item comes in a package of (24) total, so it's enough to work on either BAE or TFX blocks with any brand of 426 hemi oil pan on the market. And should be replaced with a fresh set every so often for optimum performance. Now you know exactly where to go for all your specialty hardware!
Choose either fine thread, or coarse thread in the "options" menu below.
426 Hemi Rear Main Seal Kit
If you're thinking about freshening up your primary engine in your race car, or spare engine in your race trailer then don't forget a 426 Hemi Rear Main Seal Kit to get the job done right! This set is exactly what's needed if your running a TFX, Brad, or Keith Black block. And it could prevent a whole lot of problems by your team not being shut off on the starting line because of an oil leak. A few clicks of your mouse and it's on the way!
Hi-Performance Clutch Disks
And if you're looking to streamline your clutch program when it's time to order
Hi Performance Clutch Disks without the hassle, then one call does it all! These brand new high quality disks are precision manufactured by Boninfante and available in 10", 10.5", or 10.7" diameter. And can be ordered in 1 3/8", 1 3/4", 1 7/8, (10 spline). And if you need floaters to go with em, just scroll down this page and you're there... You just found the coolest place on the planet for high end racing components! GoNitrolink.com
Price: $219.95 each
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Blower Work Stand - Triple-T
Streamline your racing operation with this brand new Blower Work Stand - Triple-T designed to allow you to service your supercharger from the top or bottom with ease and efficiency! It rotates 360° easily and has an open bottom providing easy access for servicing and cooling. It's made to last from heavy duty steel with a black powder coated finish. And equipped with 4 mounting holes for easy installation on your workbench or pit table. Another #1 choice of the pro teams right here. Order yours today!
Price: $595.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Spark Plug Rack - Triple-T
This brand new Spark Plug Rack - Triple-T is durable, made of light weight aluminum and anodized black for that awesome look! It's designed to hold 64 plugs total, allowing you to prepare enough plugs for the entire weekend. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $175.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Header Covers - Triple-T
Take a look at this brand new set of sleek looking Header Covers - Triple-T to match that same look of your race car! They come in either black anodized or polished and are constructed of .060 aluminum. They were specifically designed to not look like a box. And are available in 2 different tube diameter sizes. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $199.95
