Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Bearing Scraper Tool
Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
Valve Lapping Sticks
Or, if you prefer to keep everything old school, then "Nitrolink" is here to help with one of these brand new Valve Lapping Sticks to make sure you're ready for the next round! No rocket science here, just a good quality tool that's comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8" long and comes equipped with a small and large, (1 1/8" and 1 3/8") cup on each end. Specialty pit tools available 24/7 right here on our website!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black
If your in the market for a new set of wheels that can perform on the race track just as good as they look! Then check out this brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black anodized for that awesome appearance we just can't get enough of! This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! If you have any further questions, just give us a call as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished
Picture your race car under the lights at night with a brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished finish. This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Order your new set today... Both you and your photographer will be glad you did!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black
Big Show Top Fuel Dragster or Nitro Funny Car Legal with upgraded SFI tags!!! This set of 16x16 Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black are already anodized for that awesome appearance we all admire! This set comes complete with the mandatory drive hub centers, required for NHRA pro category competition. They're brand new and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings are scalloped for lighter weight and utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Mount a set of these up and make a statement on race day that you're there to win!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Polished
Big Show Top Fuel Dragster or Nitro Funny Car Legal with upgraded SFI tags!!! This set of 16x16 Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Polished to offer a brilliant shine come complete with the mandatory drive hub centers, required for NHRA pro category competition. They're brand new and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. They utilize 24 bolts total on the outside, as well as the inside of the Beadlock Rings, that are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! And the polished finish would be the perfect choice for those photos of your race car on the starting line under the lights at night!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
