"Nitrolink" carries a complete line of all Simpson Race Products!
Simpson Tow Straps
The next time you tow up to the lanes for the next round, why not let us set you up with one of these brand new high quality Simpson Tow Straps to make sure the job gets done properly! These straps measure 15 ft. long and feature a 2" wide webbing that's equipped with D-rings on both ends. These straps have been responsible for towing thousands of race cars into the winners circle over the years... And would be happy to do the same for your race team! Order yours right here!
Price
$485.00 – $575.00Price range: $485.00 through $575.00
Total
$485.00 – $575.00Price range: $485.00 through $575.00
We offers a complete line of all Dan Olson Race Products!
Dan Olson BBC Aluminum Valve Covers
Attention all Big Block Chevy Race Teams! "Nitrolink" is always happy to help make your engine look as good as it performs with a pair of brand new Dan Olson BBC Aluminum Valve Covers. Just take a look at the tig welding and you'll see a quality product that's equipped with 3/8" size billet rails that were designed to help provide a flat secure seal even after repeated installation and removal. They can be ordered standard, or with rail oilers at a slight additional cost if you choose. And this style is sure to offer that clean, finished appearance you've been looking for!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Williams Race Products!
Williams BBC Aluminum Valve Covers
If the Big Block Chevy is your weapon of choice on race day but it could stand a little dressing up, then lets set you up right here with a brand new pair of Williams BBC Aluminum Valve Covers. And check out the craftsmanship, as this set is 100% tig welded and comes equipped with 3/8" size billet rails that not only help provide a tight secure seal. But also assist in retaining flatness even after repeated removal and installation. They can be ordered in either a tube, or tubeless mounting style and can also include added options such as spring oilers, oil fill cap, breather tubes, or weld bungs at an additional cost. Call today and we'll be happy to get a set started just for you! Price starts at: $280.00 set.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" carries a complete line of all Portatree Products!
Portatree Eliminator Next Gen Practice Tree
Attention all Drivers!!! Keep those lightning quick reflexes razor sharp and ready to mow down the tree on the starting line! This Portatree Eliminator Next Gen Practice Tree is the ultimate in reaction time training and perfect to work out on while your getting your thoughts together in the race trailer lounge, or sitting in the tow vehicle waiting in the staging lanes. It comes complete with 2 hand switches, 12V wall adapter, wire table top stand and handy carrying case. It utilizes "outdoor bright" LED lights and measures 8.75" high, x 6.25" wide. Optional foot pedals, vehicle connections, etc; can be added later and are sold separately. Many races are won on the starting line and practice makes perfect, so don't be late!!! Order one here today!
Piston / Rod Rack
It's strong, it's durable and it's ready to offer your race team, trailer, or race shop that professional look it deserves! This high quality Piston/Rod Rack is brand new and perfect for holding your complete set of pistons & rods while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. It measures 22 1/2" long by 11" wide by 8 1/2" tall. The top is equipped with a vinyl coating to prevent piston damage. And it also has an easy to clean drip tray on the bottom. Pretty cool!!! And works great for storing complete sets in your trailer during transport. Don't lay those expensive pistons & rods on the work bench or elsewhere and risk picking up dirt, metal shavings, etc; before they're installed. You're only a few clicks away, to get one on the way!
Track Meter Race Track Surface Analyzer
Every "Big Show" nitro team on tour does it... They gather up as much data as possible so they can plug in they're best tune-up prior to sending their driver down the race track... And now, so can you! Knowledge is key and this original pro style Track Meter Race Track Surface Analyzer is the exact one you see on TV every weekend. And could provide your race team with that one extra advantage needed to be one step ahead of the competition on race day. This simple to use tool, when used correctly provides consistently accurate measurements of several key areas on the race track surface. Your crew member simply stands on both machined aluminum foot tabs, turns the handle to a specified degree, then reads the gauge... Done! Each Track Meter comes with an easy to install data tracking software to store your measurements, current temperature, time of day, and lane side to aid in track surface analytics, that can be stored for multiple runs during qualifying and eliminations. Start building your library of data from multiple race tracks over multiple runs for years of comparison data to aid in race car set-up from here on out! Order one today... Now you're ready to play!!!
Ultra-Sturdy Cylinder Head Holder
One more specialty tool right here to help make your job a little easier! This durable Ultra-Sturdy Cylinder Head Holder is one of those items that if you use it once, you'll wonder how you ever managed without it. This one fits most any style cylinder head and holds it securely at a 60° angle, perfect for any type of service. And the 3-piece design utilizes a handy tie rod on one side to help prevent tipping. You're only a couple clicks from having one on the way, so order today!
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Bearing Scraper Tool
Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
