MSD "Pro Crimp" Plug Wire Crimp Tool Pliers
Try it once.. And wonder how you ever got along without it! This is one of those "specialty tools" that will be the first and only one you reach for when it comes to building a new set of plug wires on your race car. These high quality MSD "Pro Crimp" Plug Wire Crimp Tool Pliers were specifically designed to carry out that unwanted task and do it better than anything else on the market. It's precision stripping jaws deliver a precise cut, then crimps both sides, 90 degree and straight wire ends. It features interchangeable jaws allowing for a variety of different style crimps with one heavy duty tool. The hardened steel frame with comfortable molded hand grips and the ratchet action provides secure, factory quality crimps every time. Order one today... Problem goes away!
Sleeve Installer Tool
Check out the quality and craftsmanship that goes into making this brand new
Sleeve Installer Tool one of the nicest driver's you will ever use! This one's anodized black and comes equipped with a serrated handle for a sure grip. It weighs in at almost 10 lbs; for just the right leverage to assure the job gets done correctly with less effort. Pair this Sleeve Installer up with one of our Sleeve Puller Slide Hammers (sold separately) for a perfect match! GoNitrolink.com for all your specialty pit tool needs!
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson Pilot Chute
As you know, it's important to keep every component on your race car in top condition before you head out for the next event. And this Simpson Pilot Chute should be one of the items at the top of your list, when it comes to keeping your Chute in the proper condition required to help it perform at its best. This is the new current style, standard duty model that's now required because it's easier to spot on the race track by officials if it becomes detached. And it works with both the 12' Simpson Top Fuel "Pro" Crossform Chute, or the 10' Simpson Skyjacker "Sportsman" Chute. So, if you need one... Here it is! If you have one... Then here's your spare!
Simpson Disinfecting Helmet and Equipment Dryer
Attention all drivers... Keeping your expensive race gear in top condition is key to keeping you comfortable in the drivers seat so you're able to perform at your best. And this brand new Simpson Disinfecting Helmet and Equipment Dryer was developed to do just that! No racer looks forward to putting on a soaking wet, smelly helmet from the last round, however this handy compact unit eliminates that all together... But that's not all! It also comes complete with attachments to dry and sanitize your race gloves and driving shoes as well. This unit plugs into your standard 110v outlet and is equipped with a quick 20 minute ozone feature that cleans and disinfects for a healthier environment. And it provides a safe heat temperature designed specifically for the interiors of rated helmets to prevent mold, and mildew before it starts. It helps condition your helmet liner and cheek pads that degrade over time from perspiration and bacteria by slowing down the process, keeping your equipment in peak condition. Now you can quickly refresh your gear in between rounds, so you're able to focus on one thing... Winning!
Racers helping racers do what they do best! GoNitrolink.com
A NOTE ON OZONE:
Ozone is used widely for sterilizing; this dryer generates ozone by the corona discharge method. Ozone is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations of as little as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation. Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation; it is used to deodorize air, purify water, disinfect kitchen tools and treat industrial wastes. Although ozone is widely used in industry and commerce the ozone layer, a portion of the stratosphere, is beneficial: It prevents damaging ultraviolet light from reaching the Earth's surface. This same oxidizing property, however, causes ozone to damage mucous and respiratory tissues, so for safety and comfort purposes, the manufacturer recommends using the dryer and sterilizer in a space with adequate ventilation, and stay away from it while it is disinfecting objects with ozone.
Helmet & Gloves in the photos are also available and sold separately.
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Another BRAND NEW item... Without the brand new price!!!
System 1 Oil Filter
Looking out for our valued customers is what we do best! So, lets save you some money right here by offering this brand new System 1 Oil Filter with a nice discount! This one's the inline style, designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. This one's set up to works with nitromethane and equipped with the larger AN-20, fitting size on both ends. The filter itself measures 9" long, is anodized red and ready to go racing out of the box! This exact set-up goes for right at $250 bucks... And is the only one available at this price! Save more, Race more, Win more... GoNitrolink.com
We offer a complete line of all Pit Pal products!
Collapsible Chair Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to keeping your race trailer organized and efficient, then a brand new Collapsible Chair Holder just like this one is sure to check all the boxes! It's heavy duty, made of durable aluminum, hand welded and built to last. It stores up to 3 chairs and the great news is you can mount the upper piece to a height that suits your specific needs. Measurements are 22.5"W x 3.75"H x 6.75"D plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Chairs not included.
Price
$152.95 – $190.95Price range: $152.95 through $190.95
Total
$152.95 – $190.95Price range: $152.95 through $190.95
Earl's Flame Guard Insulation - 10' Roll
Check out this Earl's Flame Guard Insulation - 10' Roll that's made of a super tough silicone rubber sleeve material to help protect your hose, cables, and wiring from extreme heat and abrasion. It's available in a 10 foot roll and allows you to easily make up the exact lengths needed for your specific application. It's now available in black, (instead of orange) for a much better appearance on your race car and fits easily over your straight fittings and B nuts.
Available in all the sizes below.
-5 straight fittings / -6 B nuts. (I.D. stretch range .600" - .790")
-8 straight fittings / -10 B nuts. (I.D. stretch range .750" - 1.125")
-10 straight fittings / -12 B nuts. (I.D. stretch range 1.062" - 1.400")
Choose size needed in the "options" menu below.
Ultra-Sturdy Cylinder Head Holder
One more specialty tool right here to help make your job a little easier! This durable Ultra-Sturdy Cylinder Head Holder is one of those items that if you use it once, you'll wonder how you ever managed without it. This one fits most any style cylinder head and holds it securely at a 60° angle, perfect for any type of service. And the 3-piece design utilizes a handy tie rod on one side to help prevent tipping. You're only a couple clicks from having one on the way, so order today!
