Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10
These Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10 - are 11/16" long, partially threaded, countersunk, with a phillips head. And can be used in a wide variety of racing applications. They offer a lighter weight alternative compared to standard steel hardware for the weight conscience racer. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
B&M "Pro Bandit" Gated Automatic Race Shifter
This next high quality component is offered to all racers out there running a Rear Engine Dragster equipped with a Powerglide! This B&M "Pro Bandit" Gated Automatic Race Shifter is definitely one of the nicest looking Shifters on the market with it's sleek design, CNC machined construction and race proven performance. It comes set up for a 2 speed powerglide transmission, however can also be converted to work with your 3, or 4, speed automatic transmission by simply replacing the hardened steel gate plate, applicable bracket and lever (sold separately) and it's forward and reverse shift pattern compatible. It measures 10"L x 1.3"W x 9.3"H and the compact lightweight design, mandatory reverse lock-out and rear cable exit check all the boxes for all our Rear Engine Dragster customers out there looking for a quality product, second to none! Please call: (916) 425-1427 with any questions, as we're here to help anytime!
Shifter cable, floor mounting brackets and hardware are all sold separately.
Price
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Total
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
Dzus Fastener Tool
Now here's a top quality Dzus Fastener Tool you'll be happy to reach for to help keep that new paint or wrap job on your race car free of damage or scratches! This quarter turn fastener tool is equipped with a rubber grip handle for a comfortable fit. It works well with all brands of fasteners, has a curved blade that helps prevent fastener damage and measures 6 1/4" total length. So give your screw drivers and fasteners a break... Order the correct tool for the job today!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Price
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Total
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Aluminum Vise Jaws
The job of building new hose lengths for your race car just became a whole lot easier! Using a set of Aluminum Vise Jaws to hold everything in place while your working can make all the difference. This set is magnetic so they work with most style bench vises, measure 4" long and help protect hose ends during assembly. And could even prevent scratches if used carefully. Another small item that could help when you're organizing!
Color may vary.
Pro Cam Degree Wheel
Possibly the nicest one on the market, this Pro Cam Degree Wheel is quality made and ready to provide years of service to your racing operation. It's durable, made of sturdy aluminum, measures 11" in diameter and equipped with a color-coded scale for instant read-outs. Grab your cam card and dial in the desired spec for a precise degreed accurate setting. The exhaust and intake centerline areas are also indicated and color-coded. Add one to you're cart, pay easily and we'll handle the rest!
Connecting Rod Vise
As we all know, aluminum rods can be a handful to hold on to while your servicing them in between rounds, or back at the race shop... So how about a solution! This super handy Connecting Rod Vise was designed to securely hold one or more of your aluminum rods while you service them, to help prevent the risk of damage. It's perfect for removing the caps, inspecting or changing rod bolts, checking rod clearances, polishing, or machining. It's strong, durable, made of billet aluminum, anodized black and can be permanently mounted to your work bench, or used with your shop vise. Inside working area is approx 4 3/4" x 2" with an overall height of 10" total by 7" wide, by 2" deep. Order one today... Problem goes away!
