426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak Analog Box - Non Pass Thru
This slightly Used Racepak Analog Box - Non Pass Thru style works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It stores your transducers and works directly with your logger allowing you to monitor 4 total functions of your choice. And can be used in conjunction with a pass-thru analog box to expand your function capabilities. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak Analog Box - Pass Thru
This slightly Used Racepak Analog Box - Pass Thru style works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It stores your transducers and works directly with your logger allowing you to expand total function capabilities (per box) 4 at a time with a max of 16 total. And can be used in conjunction with a non pass-thru analog box at the end of the chain. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
Used Racepak Dash Cable - Pro 3
This slightly Used Racepak Dash Cable - Pro 3 style, measures 144" and works with the new Racepak Pro 3 only. It plugs directly into your Racepak Pro Dash then into the data logger. And is responsible for supplying power and data readings to the Pro 3 dash unit. "Nitrolink" is the best place to shop and save, by not having to buy new elsewhere!
Another BRAND NEW item... Without the brand new price!!!
Clark 426 Hemi Head Gaskets - 4.310
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Clark 426 Hemi Head Gaskets - 4.310 for all you racers out there running fatheads! These are the copper style, for the 4.310 bore, that measure .42 thickness and ready to be pressed into service the minute you say go! Just a couple clicks and they're on the way!
Hemi Sleeve Alignment Tool
How about another super handy pit tool that's sure to make your life a whole lot easier at the race shop, or on race day! Check out this brand new Hemi Sleeve Alignment Tool that's ready for action right out of the box! This one's made of billet aluminum and it's universal design allows it to work with your 4.187" to 4.700" sleeve sizes. It's anodized black and equipped with a long size handle for a precise, proper installation. It works with both the 392 or 426 hemi's and definitely the best choice to help avoid any costly damage to your sleeves during installation... Racers helping Racers do what they do best! GoNitrolink.com
Intake Manifold Cover
This brand new Intake Manifold Cover is the perfect item to keep out dust and debris while your servicing your supercharger. It's made of 1/16" aluminum, anodized black and measures 12 1/2" wide by 13 3/4" long. And also serves as a cover to keep your competition "in the dark" from seeing any manifold design secrets. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used AFT Fuel Pump Extension
"Old School" style at a great price is what you'll find right here with this slightly Used AFT Fuel Pump Extension that's ready to bolt up right out of the box! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. This one has some slight machining on the bottom and fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another money saving product to help your racing budget go a little further! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Rob Moore Coupler
So, lets offer this slightly Used Rob Moore Coupler at a fraction of the cost of new to help get you out on the starting line that much sooner! This one could work as a pinion support, or drive shaft coupler and measures 3.5" OAL. And equipped with 1 3/4" 40, fine splines inside and 2 3/4" 20, course splines outside. So if you need one quick, just click!
