Connecting Rod Vise
As we all know, aluminum rods can be a handful to hold on to while your servicing them in between rounds, or back at the race shop... So how about a solution! This super handy Connecting Rod Vise was designed to securely hold one or more of your aluminum rods while you service them, to help prevent the risk of damage. It's perfect for removing the caps, inspecting or changing rod bolts, checking rod clearances, polishing, or machining. It's strong, durable, made of billet aluminum, anodized black and can be permanently mounted to your work bench, or used with your shop vise. Inside working area is approx 4 3/4" x 2" with an overall height of 10" total by 7" wide, by 2" deep. Order one today... Problem goes away!
Price
$93.50 – $135.95Price range: $93.50 through $135.95
Total
$93.50 – $135.95Price range: $93.50 through $135.95
We offer a complete line of all Racepak products!
Racepak Weld-In Header Bungs
Check out this complete set of (8) brand new Racepak Weld-In Header Bungs that works with your standard 1/4" EGT probes. They weld separately to each of your header pipes and work in conjunction with your Racepak Nuts & Ferrules to securely hold your EGT Probes in place. The road to the winners circle may be shorter than you think! GoNitrolink.com
Choose either stainless or regular steel in the options menu below.
"Nitrolink" offers a complete line of all MSD Products!
Dunn Style Drive - Pro Mag 44
High five, to all racers out there that prepare for all the little "what if's" that tend to get in the way over the race weekend! Because it won't be you that doesn't make the call because of some small part you forgot to order. And a perfect example of one of those parts would be this Dunn Style Drive - Pro Mag 44 for the Pro Mag 44 Magneto. This item is definitely the most common drive utilized out there. It's CNC-machined from 1018 steel with a special corrosion resistant coating applied to make this high-performance component ready to help power an 11,000 horsepower race car across the finish line! Comes complete with a new locknut for installation.
Pro Analog Tire Gauge - 3 1/2" Size
And if you're looking for an even larger gauge size, then check out this brand new top quality Pro Analog Tire Gauge - 3 1/2" Size that's sure to check all the boxes! It's offered in several PSI range options, to include 0-15 psi, 0-30 psi, 0-40 psi, or 0-60 psi for a more specific, super accurate reading! The 0-15 and 0-30 read in 1/4 lb. increments. And the 0-40 and 0-60 read in 1/2 lb. increments. It's equipped with a larger 3 1/2" glow in the dark face for easy readability. And has an accuracy rating between 1/4 lb./2% to 2% depending on the gauge you choose. And this style holds your pressure reading until released. It features a protective gauge bumper, dual bleed air pressure release buttons, internal gauge damper for a more accurate reading and longer life and a hard case to keep it safely stored during transport. A handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is also included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Available in 0-15, 0-30, 0-40, or 0-60 PSI...
Choose PSI range in the "options" menu below.
Price
$99.95 – $155.95Price range: $99.95 through $155.95
Total
$99.95 – $155.95Price range: $99.95 through $155.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 1/2" Pitch HTD Blower Pulley
Choose Any Size - 1/2" Pitch HTD Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak Analog Box - Non Pass Thru
This slightly Used Racepak Analog Box - Non Pass Thru style works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It stores your transducers and works directly with your logger allowing you to monitor 4 total functions of your choice. And can be used in conjunction with a pass-thru analog box to expand your function capabilities. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak Analog Box - Pass Thru
This slightly Used Racepak Analog Box - Pass Thru style works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It stores your transducers and works directly with your logger allowing you to expand total function capabilities (per box) 4 at a time with a max of 16 total. And can be used in conjunction with a non pass-thru analog box at the end of the chain. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
Used Racepak Dash Cable - Pro 3
This slightly Used Racepak Dash Cable - Pro 3 style, measures 144" and works with the new Racepak Pro 3 only. It plugs directly into your Racepak Pro Dash then into the data logger. And is responsible for supplying power and data readings to the Pro 3 dash unit. "Nitrolink" is the best place to shop and save, by not having to buy new elsewhere!
Another BRAND NEW item... Without the brand new price!!!
Clark 426 Hemi Head Gaskets - 4.310
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Clark 426 Hemi Head Gaskets - 4.310 for all you racers out there running fatheads! These are the copper style, for the 4.310 bore, that measure .42 thickness and ready to be pressed into service the minute you say go! Just a couple clicks and they're on the way!
