Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used BAE Fuel Pump Extension
Another money saving product to help stretch your racing budget a little further is what you'll find right here with this slightly Used BAE Fuel Pump Extension that's ready to install and go racing! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. And fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). "Old School" style at a great price right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used AFT Fuel Pump Extension
"Old School" style at a great price is what you'll find right here with this slightly Used AFT Fuel Pump Extension that's ready to bolt up right out of the box! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. This one has some slight machining on the bottom and fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another money saving product to help your racing budget go a little further! GoNitrolink.com
Digital Dash Cover Lens
GoNitrolink.com is your one-stop shop for some of the coolest race parts on the planet... But, also their replacement parts as well! If you have one of our Racepak Digital Dash Covers, then it may be time to replace your scratched, worn out Digital Dash Cover Lens with a brand new one. Once you remove the protective covers seen in the photo, your crew chief will once again be able to see all your real time data on the starting line crystal clear once again. And not only are we going to make ordering 'em super easy. But also super affordable as well... Just click, pay and it's on the way!
Sold separately.
Digital Dash Cover - Racepak
Helping to keep one of your main on-board computer components safe is the only job this brand new Digital Dash Cover - Racepak was designed to do! This one works with the popular Pro 2 or Pro 3 early style digital dash. It comes complete with a replaceable clear top lens that not only helps protect your dash from fuel, hot oil, brake cleaner, or track debris. But also offers your crew chief optimum visibility for a clear look at real time data on the starting line. It's durable, light weight and easy to install. And commonly mounted on top of your air timer "tool box" if you're running a front engine dragster or funny car. Or, on the firewall under the roll cage if you're running a rear engine dragster (hardware not included). This item is definitely worth every penny and one of the best ways to help protect your expensive investment... All the cool components offered right here 24/7! GoNitrolink.com
Replacement Lenses also available.
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
Carbon Fiber Engine Containment Diaper
State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Reverser Output Shafts
Quality second to none is exactly what you'll find right here! And these brand new
Moore Performance Reverser Output Shafts are the only choice of the majority of the pro nitro teams on tour for two reasons... Performance & Durability! These are sold separately and work specifically with the Moore Reverser. They're the standard 1 3/4" 40 spline style that's offered in 2 lengths: Large = 6" out from the reverser. Or, Small = 3.265" out from the reverser, with other custom lengths available. They're made of heat treated steel and are a work of art when it comes to craftsmanship! Hi performance taken to the next level, right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Custom Input Shafts
Performance, Durability and the choice of Champions is what you're looking at right here! Check out these brand new Moore Performance Custom Input Shafts that are being offered in 3 popular sizes: 1 3/8" 10 spline, 1 3/4" 10 spline, or 1 7/8" 10 spline on the clutch pack side. They're sold separately and can be ordered to work with your Moore Performance or Lenco reverser if you're running direct drive. Or, Lenco or B&J transmissions, with your choice of either a large or small pilot size. They're made of heat treated steel and another example of craftsmanship at its finest! Next level, hi performance components 24/7 right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Heavy Duty Valve Lash Adjusting Torque Wrench
Designed specifically for Blown Nitro & Alcohol Engines... And custom built to meet your specs!!! This high quality precision Heavy Duty Valve Lash Adjusting Torque Wrench comes equipped with a longer handle for better leverage. It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. And this style is delivered to your door preset to the torque spec of your choice, from 20 to 45 lbs. It also comes complete with your choice of either a 7/16" or 1/2" 12pt. socket that's welded on... So it stays on! And finally, choose your Hex Key size, either 5/32 or 3/16 and you're all set... Custom designed just for you! Specialty Pit Tools and a whole lot more, right here! GoNitrolink.com
Choose Socket size, Hex Key size and Torque preset in the "options" menu below.
Dragster Nose
Ready to start on that Dragster project out in the race shop yet? Well, then this next item could be exactly what you've been looking for... And let's save you both time and money buying it right here!!! This slightly used Dragster Nose is in nice shape, made of fiberglass, weighs 3 lbs. and measures: 30 3/8" long by 10 1/4" tall in the back. And 14" inside at it's widest point. We'll price this one accordingly, as it has a small crack that can easily be repaired on one side right at the bottom. After that, choose your paint color and get ready for the big day! Unmatched Customer Service, right here! GoNitrolink.com
JT Stewart Barrel Valve Enrichment Knob
Paying close attention to all the details is usually what gets the job done on race day! And if you're running a JT Stewart Barrel Valve then lets get you set up with a brand new JT Stewart Barrel Valve Enrichment Knob just like this one to match! It's made of light weight billet aluminum, anodized black and features a knurled outside edge and white legible numbers to insure a precise adjustment. It's designed to fit on either the larger big show, or nostalgia style JT Barrel Valves. As well as the older style JT models... These are sold separately and also include a set screw for a quick easy install. All the right components + unmatched customer service = GoNitrolink.com
