Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10
These Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10 - are 11/16" long, partially threaded, countersunk, with a phillips head. And can be used in a wide variety of racing applications. They offer a lighter weight alternative compared to standard steel hardware for the weight conscience racer. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Race Engine Storage Bag Kit
Now you know exactly where to go to get em!!! This reusable Race Engine Storage Bag Kit is the perfect fit for the job. And can be difficult to find in their correct sizes when you need them. The Engine Bag is large enough to fit any (long block) race engine, including the headers and fits over most engine stands or dyno carts. And the Cylinder Head/Crankshaft Storage Bags are large enough to fit Hemi or Big Block Chevy Heads. These heavy duty, thick clear poly bags help keep those expensive racing parts free of dirt, metal shavings and other unwanted debris prior to, or after assembly. Ordering made easy, right here!
Kit includes: 1 Engine Storage Bag and 2 Cylinder Head/Crankshaft Bags.
Dzus Fastener Tool
Now here's a top quality Dzus Fastener Tool you'll be happy to reach for to help keep that new paint or wrap job on your race car free of damage or scratches! This quarter turn fastener tool is equipped with a rubber grip handle for a comfortable fit. It works well with all brands of fasteners, has a curved blade that helps prevent fastener damage and measures 6 1/4" total length. So give your screw drivers and fasteners a break... Order the correct tool for the job today!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
