Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Price
$136.50 – $160.00Price range: $136.50 through $160.00
Total
$136.50 – $160.00Price range: $136.50 through $160.00
Enderle 3-Way Fuel Shut-Off
It's small, lightweight and flows the full line size! That's the best way to describe this brand new Enderle 3-Way Fuel Shut-Off that easily installs between your fuel pump outlet and metering valve, with the outlet on the side returning fuel back to the tank. When in the "off" position, it allows you to turn the engine over to adjust valves, check timing marks, etc; without feeding fuel into the engine. It's equipped with a pump fitting and can be ordered with either -6, or -8 size flared fittings, your choice! Cable clamp also included. GoNitrolink.com for unmatched customer service anywhere!
Choose either -6, or -8 size in the "options" menu below.
Price
$179.99 – $259.99Price range: $179.99 through $259.99
Total
$179.99 – $259.99Price range: $179.99 through $259.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle BBC Front Cover
Now here's an item that all you Big Block Chevy racers out there on a budget can definitely get some use out of! This brand new Enderle BBC Front Cover offers both performance and nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. This cover uses a standard BBC front seal (sold separately). Add one of these to your shopping cart right here... A couple clicks after that and it's on it's way!
Choose cast aluminum or polished finish in the "options" menu below.
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
Enderle Fuel Hydrometer Kit
If you prefer to go "old school" when it comes to mixing your fuel on race day, then this slightly used Enderle Fuel Hydrometer Kit is sure to deliver! This starter kit offers up the basics needed to measure your nitromethane reading from 50% to 100% and works in conjunction with any thermometer (not included). It's in excellent shape with no damage and includes one hydrometer, flask and Enderle's signature padded wood case! The same way they've been selling them for years. New price is almost $300 bucks elsewhere...
So, GoNitrolink.com and let the savings begin!
"Nitrolink" offers a complete line of all Enderle Products!
Enderle K-Style Barrel Valve
Now here's an item that's stood the test of time simply because of how well it performs on the racetrack! This brand new Enderle K-Style Barrel Valve is used on a wide variety of applications. Sometimes referred to as a metering valve assembly, these can be set up for blown nitro, alcohol, or gas. They're precision machined from aluminum and anodized black. It's ready to accept your -6, and -8 size hose fittings and has provisions to run port nozzles and a pump saver check valve. Recommended when you're running a fuel pump flowing 12 GPM or more. And the "high flow" model is also available for nitro applications as well. Shop smart... Race often... Go with Nitrolink!
Price
$179.99 – $239.99Price range: $179.99 through $239.99
Total
$179.99 – $239.99Price range: $179.99 through $239.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle SBC Front Cover
All you Small Block Chevy racers out there on a budget are sure to appreciate this brand new Enderle SBC Front Cover when it comes to performance and a little nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. The large crank opening will accommodate a small block crank with a big block snout if desired. Front seal sold separately. Add one of these to your shopping cart right here... Then get your tools ready!
Choose cast aluminum or polished finish in the "options" menu below.
Enderle Throttle Arm - Double End
Keep that blower injector performing at its best with this brand new Enderle Throttle Arm - Double End. This one can be ordered in either 5/16" splined shaft size for Bugcatcher Injectors, or 7/16" size for Bird or Buzzardcatcher Injectors. It's made of light weight billet aluminum and anodized black for that stealth look... GoNitrolink.com for all your high performance replacement parts!
Choose shaft size needed in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Enderle K Barrel Valve
And if you're looking to save a few bucks not having to buy new, then save "Nitrolink" to your favorites and we'll keep bringing you items like this Used Enderle K Barrel Valve that's in very nice shape, free of any damage and already set up for alcohol. Sometimes referred to as a metering valve assembly, this one's precision machined from aluminum and anodized black. It's ready to accept your -6, and -8 size hose fittings and has provisions to run port nozzles if you choose. And it comes complete with an idle check valve included all for one low price! Check back often, because there's more money saving deals on the way!
