Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Boninfante Titanium Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Boninfante Titanium Clutch could work on your nitro burning front or rear engine Dragster, Funny Car, Altered, or ? It's slightly used and in great shape and is the 10.5" size, equipped with the lighter weight titanium pressure plate, flywheel and donut. It's set up to run 5 disks (not included) and is the 9 stand model with upgraded 5/8" studs, with all adjusters included made of titanium. And loaded with 15 levers, with the option to add 3 more.
Why buy new???
So, if you've had a chance to shop around for a new Glide Clutch. Then be prepared to spend right at $15,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for thousands less than the cost of new so don't delay, order today!
Priced to move at: Only $3295.00 OBO.
Hilborn 351 Windsor Stack Injector
Let's file this next item in the extremely rare, hard to find vintage category!!! This slightly used Hilborn 351 Windsor Stack Injector is a little different from the parts we generally sell, however if you're Ford racer looking to make a statement then today's your lucky day! This set is in very nice shape and free of any damage or repairs and equipped with the 2 1/2" size butterflies. It's loaded with a complete set of 7" stacks and a slightly used Hilborn barrel valve and linkage that are also included as well. Both throttle shafts have a secure fit and operate nice and smooth with no binding. And the aluminum valley cover displays the iconic Hilborn name across the top... Visit GoNitrolink.com regularly for more "Vintage Surprises" that are coming soon!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Price
$1,400.00 – $1,950.00
Total
$1,400.00 – $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Cam F/X 426 Hemi Roller Lifters
How about a brand new set of Cam F/X 426 Hemi Roller Lifters for your Nitro Burning Top Fuel or Nostalgia Dragster, Alcohol Funny Car, Blown Gas Altered, A/Fuel Car, Drag Boat, Tractor Puller, or ? This complete set of (8) pair can work with your TFX, BAE, or Keith Black, cast or billet block. All Cam F/X Lifters are profiled nicely and offered in your choice of either .904", 1", or 1 1/16" lifter bore size. So if you need a set, here they are... If you have a set, then don't hit the road without spares... And don't forget to save gonitrolink.com to your favorites for all your nitro, alcohol and gas hi performance needs!
Choose Lifter Bore size in the "options" menu below.
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
TAK Titanium Blower Restraint Plates
Hi-Performance Titanium Racing Components for way less than the price of new!!! And that's exactly what you'll find right here with this slightly used set of TAK Titanium Blower Restraint Plates that are being offered to include both the top and bottom plates. This upgraded set-back style is in nice shape, is super light weight and ready to save it's new owner a ton of money not having spend over $3,000 bucks for this exact set-up brand new.
Titanium top plate includes all front, back and side straps with mounting holes measuring
4 1/2" x 13 1/4" center to center. And it's equipped with the standard 4 1/2" x 11 1/2" opening. Titanium bottom plate mounting holes fit over your existing blower studs. And it's equipped with the standard 4 3/16" x 13 15/16" opening... And the great news is that this set-up comes with current fresh cert tags, so you know your money was well spent here! Titanium, carbon fiber & billet racing components taken to the next level! GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster or Heritage Series Nostalgia Nitro Funny Car, then you're on track to save big time! This 10 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
Price
$1,995.00 $1,495.00
Total
$1,995.00 $1,495.00
Intake Manifold Flatness Checker
Here's one more specialty pit tool that's sure to earn it's keep the first time it lets you know there's a problem before the next round! Check out this brand new
Intake Manifold Flatness Checker that offers precision accuracy to determine if your blower manifold is perfectly flat, or if it needs to be lapped for an optimum blower to manifold seal. Don't risk loosing critical boost pressure by running a warped manifold just because you don't have the proper tool to diagnose the problem. Here's one more way to help prevent declining performance, or possible costly parts failure on the race track. This valuable tool is ready for action right out the protective wooden case that's also included. That helps provide secure storage in your trailer, at your race shop, or on the road. And it works with most any size blower manifold on the market... Making sure you're better prepared for the next event is what we do best! GoNitrolink.com
Price
$1,612.00 $1,449.95
Total
$1,612.00 $1,449.95
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag Power Grid - Top Fuel - F/C
State of the art performance adjustment capabilities right here for all our Top Fuel and Nitro Funny Car customers! This MSD Pro Mag Power Grid - Top Fuel - F/C is mandated in both NHRA & IHRA competition. And provides a programmable time-based timing curve with up to 30 points at 1.0 increments down to 0.01 second intervals. It stores different timing maps that can easily be transferred or changed at the last minute while waiting in the staging lanes. The MSD View Software that's included provides a virtual dash board that can be configured to display engine RPM, timing, timing retard, WOT, timing reset, crank trigger inputs and output triggers. And also includes a CAN-Bus connection sending the recording to your Racepak Data Logger. Install one today... And get from A to B more efficiently tomorrow!
Racers Discount pricing available!
Please call: (916) 425-1427 anytime to order.
Track Meter Race Track Surface Analyzer
Every "Big Show" nitro team on tour does it... They gather up as much data as possible so they can plug in they're best tune-up prior to sending their driver down the race track... And now, so can you! Knowledge is key and this original pro style Track Meter Race Track Surface Analyzer is the exact one you see on TV every weekend. And could provide your race team with that one extra advantage needed to be one step ahead of the competition on race day. This simple to use tool, when used correctly provides consistently accurate measurements of several key areas on the race track surface. Your crew member simply stands on both machined aluminum foot tabs, turns the handle to a specified degree, then reads the gauge... Done! Each Track Meter comes with an easy to install data tracking software to store your measurements, current temperature, time of day, and lane side to aid in track surface analytics, that can be stored for multiple runs during qualifying and eliminations. Start building your library of data from multiple race tracks over multiple runs for years of comparison data to aid in race car set-up from here on out! Order one today... Now you're ready to play!!!
