We offer a complete line of all Mahle Piston Ring products to fit your needs!
Mahle Piston Oil Ring Kits
Outfit your race team with top of the line Mahle Piston Oil Ring Kits for optimum performance and durability! Trusted by many of the pro nitro teams on tour, these rings are offered as a first, second and oil style ring and available in a wide variety of sizes to fit your application. So give us a call today with your requirements, then check piston rings off your list... Hi-performance consumables taken to the next level!!! GoNitrolink.com
Call: (916) 425-1427 anytime to order!
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm 36T Mag Blower Pulley
How about a nice Used RCD 11mm 36T Mag Blower Pulley that's ready for showtime! This one's the GT style made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Chassis Stabilizer - Round
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Round style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the popular 18" diameter round style, manufactured from durable rubber. Its sleek design and 1.75" deflated height allows it to slide under the lowest ground clearance vehicles and it can inflate to an adjustable maximum height of 10". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Rectangular 4" lift style also available.
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
We offer a complete line of all Mahle Piston Ring products to fit your needs!
Mahle Piston Rings
Outfit your race team with top of the line Mahle Piston Rings for optimum performance and durability! Trusted by many of the pro nitro teams on tour, these rings are offered as a first, second and oil style ring and available in a wide variety of sizes to fit your application. So give us a call today with your requirements, then check piston rings off your list...
Hi-performance consumables taken to the next level!!! GoNitrolink.com
Call: (916) 425-1427 anytime to order!
Price
$11.09 – $92.25Price range: $11.09 through $92.25
Total
$11.09 – $92.25Price range: $11.09 through $92.25
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP Straight Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP Straight Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Price
$27.08 – $95.48Price range: $27.08 through $95.48
Total
$27.08 – $95.48Price range: $27.08 through $95.48
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 90° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 90° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Price
$27.08 – $95.48Price range: $27.08 through $95.48
Total
$27.08 – $95.48Price range: $27.08 through $95.48
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 45° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 45° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Set-Back Blower Snout Strut Kit
Another quality component specifically designed to deliver both performance and durability!!! And that's exactly what you'll find right here with this brand new Set-Back Blower Snout Strut Kit that offers all you racers running the longer style blower snout extra added support along the bottom to help avoid costly damage during competition. It's the same style used by the majority of the top nitro teams on tour because it allows you to quickly remove the supercharger without having to worry about unbolting the struts, due to the super trick bracket design that fits over your idler bracket. All 4 brackets included are made of billet steel and the 2 adjustable arms are billet aluminum. PLEASE NOTE: This set-up was designed specifically to work with the snout clamp style belt guard/starter bracket and angled set back style idler bracket only. Give us a call if you have any questions, as we're always happy to help! Race, win, repeat... GoNitrolink.com
Price
$27.08 – $95.48Price range: $27.08 through $95.48
Total
$27.08 – $95.48Price range: $27.08 through $95.48
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 30° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 30° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Weld 16x16 Liner Rear Wheels
Almost new with very little track time!!! Is exactly what you'll find right here with these slightly used Weld 16x16 Liner Rear Wheels that are sure to save your race team both time and money! This set is anodized black for that awesome stealth appearance and would look great on your Top Alcohol Dragster, Alcohol Funny Car, Pro Mod, Outlaw Pro Mod and so on. They are the popular Alumastar non-beadlock liner style equipped with a 5 on 5 1/2" bolt pattern. Offset/backspace measures 5 1/4" with both being in excellent, almost new condition with very slight nicks and scratches from minimal use. And if looking to avoid the 2 months + of down time waiting for delivery. Along with not wanting to spend almost $3800 bucks for a new set elsewhere... Then here's the perfect solution! This set is in stock and ready to ship immediately... Saving racers time & money is only part of what we do best! GoNitrolink.com
Priced to move at: Only $2195. OBO
