Price
$2.95 – $4.05Price range: $2.95 through $4.05
Total
$2.95 – $4.05Price range: $2.95 through $4.05
itrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fat Heads
If you're running a set of fat heads on your race car, then here's a perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fat Heads at a great price! This set of (14) total is made of durable steel, zinc coated and the 1/4" -28 fine thread size to work with your fat heads, with your choice of either a serrated or non-serrated flange. Add a set of 1/4" fine thread valve cover studs to your cart and you're all set for race day!
Choose either serrated, or non-serrated flange in the "options" menu below.
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Hi-Performance Clutch Disks
And if you're looking to streamline your clutch program when it's time to order
Hi Performance Clutch Disks without the hassle, then one call does it all! These brand new high quality disks are precision manufactured by Boninfante and available in 10", 10.5", or 10.7" diameter. And can be ordered in 1 3/8", 1 3/4", 1 7/8, (10 spline). And if you need floaters to go with em, just scroll down this page and you're there... You just found the coolest place on the planet for high end racing components! GoNitrolink.com
Price: $219.95 each
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Piston / Rod Rack
It's strong, it's durable and it's ready to offer your race team, trailer, or race shop that professional look it deserves! This high quality Piston/Rod Rack is brand new and perfect for holding your complete set of pistons & rods while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. It measures 22 1/2" long by 11" wide by 8 1/2" tall. The top is equipped with a vinyl coating to prevent piston damage. And it also has an easy to clean drip tray on the bottom. Pretty cool!!! And works great for storing complete sets in your trailer during transport. Don't lay those expensive pistons & rods on the work bench or elsewhere and risk picking up dirt, metal shavings, etc; before they're installed. You're only a few clicks away, to get one on the way!
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
We offer a complete line of all Pit Pal products!
Engine Lift Sling
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if you're running a blower or tunnel ram, then let's get you set up with a brand new Engine Lift Sling just like the one to make that job a whole lot easier! This sling is definitely one nicest on the market and plated for long lasting finish. It has a 1,000 lb. weight capacity and equipped with 4 polyester strap that measure 22" long. Simply hook it to your engine puller and attach the 4 straps to your engine using your header studs or exhaust bolt holes, then pull! It measures 28"W Sling x 27.5" Belt length. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Lapping Plate Sand Paper Sheets
Keep that brand new Lapping Plate earning its keep with an extra supply of Lapping Plate Sand Paper Sheets specifically fitted for the plate itself. These sheets are equipped with the popular 60 grit surface needed, with an adhesive backing for a secure fit. Each sheet is sold separately and when used with the lapping plate, it's one of the most effective ways to help assure that your blower and manifold are working together for optimum performance! And we'll make it quick and easy to order yours right here... Job done!
Billet Dual Feeler Gauge Handle
At "Nitrolink" it's all about choices! So, here's one more Billet Dual Feeler Gauge Handle
if you prefer using the longer style that holds 2 separate gauges on the opposite ends of the handle. They're strong, durable, made of billet aluminum and ready to assist your top end technician when it's time to quickly run thru a set of valves. They measure 5" x 1" x .5" total and can accept various sizes of 1/2" wide feeler gauges depending on your application. And can be stacked 3-4 gauges high if you choose... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Sold separately, Gauges not included.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Hi-Performance Clutch Floaters
Nitrolink Racing Components is your one-stop shop for all your consumable needs! And when it's time to order Hi-Performance Clutch Floaters for the race weekend, then we're here to help with that as well. These brand new high quality floaters are precision machined and available in 10", 10.5", or 10.7" diameter, to work with your large or small size clutch stands. They can be ordered in 6, 8, or 9 stand configuration with your choice of various thickness and cutter groove options. Here's the perfect opportunity to improve your clutch program with one phone call... Order today!
Price: $79.95 each
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Bearing Scraper Tool
Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!
Valve Lash Adjusting Torque Wrench
How about a high quality precision Valve Lash Adjusting Torque Wrench tool all in one!!! It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. Preset to 22 lbs, it can be customized up to 26 lbs, and comes complete with the following: 1/8, 5/32, & 3/16" Hex Keys. And it accepts any standard 3/8 drive socket (not included). Take one of these to the race track once... Then wonder how you ever managed without one! GoNitrolink.com for all your specialty pit tool needs!
