Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson Stage 5 Billet 426 Hemi Heads
Check out this nice set of Alan Johnson Stage 5 Billet 426 Hemi Heads perfect for use on your Top Fuel Dragster, Nitro Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on. This slightly used set is in excellent shape and works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your standard deck fuel head style manifold. They're the .100 tall style and accept your 2.450 size intake and 1.925 exhaust valves, (not included). Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are already machined for o-rings and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Why Buy New??? So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $2195.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster/Altered Headers
Check out this awesome looking set of Dragster/Altered Headers up for sale today! This set looks to be from either Triple T Race Products, or Hedman Headers. And could look great on your Top Fuel or Alcohol Dragster, AA/Fuel Altered, Drag Boat, Tractor Puller and so on... They're slightly used and in very nice shape with no visible damage. And set up to work with your 426 Hemi fuel heads made by Alan Johnson (up to Stage 5), or any BAE, or Dart, fuel heads. Tube diameter is the popular 2 1/2" size, with the standard degree bend. And this set is equipped with EGT bungs already installed to accept your Racepak or similar computer probes. Or, just cap them off if you're not running a computer. Both quality and craftsmanship are present here as you check out the built in separation plate design in between each pipe and the support rods added for extra strength and durability. And here's an extra added bonus to make the deal that much better! We'll throw in a complete set of (4) header brackets ready to accept you're blower restraint straps. Just add your own standard size release pins and head for the lanes!
Please note: This set will not fit if you're running "Fatheads."
Upgraded SFI 15.4 Tags!!! Top Fuel Dragster or Nitro Funny Car Legal!!!
Used Weld 16x16 Beadlock Rear Racing Wheels
Check out this set of slightly Used Weld 16x16 Beadlock Rear Racing Wheels up for sale today! This set is the "Magnum Pro" style and comes complete with the upgraded drive hub centers, making them legal for both NHRA Top Fuel Dragster or Nitro Funny Car competition. However, they can also be used on your car, even if your rear end is not equipped with the drive hub set up. This set is NHRA "tech friendly" with the upgraded SFI 15.4 tags. And are the very popular 5 on 5 1/2 bolt pattern, with a 4 1/2" offset/backspace. They utilize 28 bolts total on the outside, as well as the inside of the beadlock rings. The polished finish on both wheels is in nice shape and both still have a nice shine. Black anodized/profiled centers are also in good shape with only minor nicks and scratches. Stud holes are in great condition with no cracks or oblong. Inner and outer beadlock rings also get the thumbs up and are outfitted with a complete set of brand new bolts and washers. Both wheels have never been bent up, welded on, or repaired. And as usual, you will find with this set not being brand new, your common normal wear with slight nicks & scratches throughout. Both wheels are in nice shape. And everything looks good to go... So mount this set up and head for the lanes!!!
