Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used AFT Fuel Pump Extension
"Old School" style at a great price is what you'll find right here with this slightly Used AFT Fuel Pump Extension that's ready to bolt up right out of the box! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. This one has some slight machining on the bottom and fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another money saving product to help your racing budget go a little further! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Small
Lets get the job done for a lot less money, with this slightly Used AFT Slide Valve - Small style, designed for the medium size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Save time, save money, GoNitrolink.com!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson AL Valve
All nitro cars to the lanes please!!! And if you're running an AJPE slide valve, then you're going to want to take a look at this very nice Used Alan Johnson AL Valve to complete the package! This one's in nice shape, free of any damage and regulates fuel pressure, or isolates your fuel system and acts similar to an accelerator pump. It's equipped with -12 fittings on the side and -3 fittings on the t-fitting at the bottom. It's used in conjunction with your A.J. slide valve and is fully adjustable to accommodate different fuel pressure ranges. Save money, save time! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used BAE Fuel Pump Extension
Another money saving product to help stretch your racing budget a little further is what you'll find right here with this slightly Used BAE Fuel Pump Extension that's ready to install and go racing! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. And fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). "Old School" style at a great price right here! GoNitrolink.com
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Blower / Injector Spacer
Slightly used, in great shape and ready to hopefully join you in the winners circle is this
Used Blower / Injector Spacer that installs quickly in between your blower case and injector. This ones made of light weight aluminum and equipped with 2 air bleed fittings on the front edge for fine tuning your idle setting. It measures 1" tall, o-ring ready on both sides and mounting holes measure 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. One more item off your check list that's in stock and ready to ship!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
