Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Sanders Rear Racing Wheel Centers
Now here's a item that would be almost impossible to find at the race track if you needed them for spares! This set of slightly Used Sanders Rear Racing Wheel Centers is in almost new condition with very little use. Both the stud holes and the 15 total mounting bolt holes are in great shape and this set fits the popular 5 on 5.5 bolt pattern. And the great news is they can work on either an SFI 15.3 or 15.4 spec wheel with any offset. And that means if you're running the upgraded drive hub set-up required for NHRA pro competition or the standard hubs, either way this set has you covered! Freshen up that rear set on your race car, or that spare set in your race trailer with a couple clicks right here... Another job done!
Price below is for a set of 2.
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Blower Starter Bracket
If you're running a blower starter, then it certainly pays to keep all the other little related components in good shape to insure your car fires up every time! So, check out this slightly Used RCD Blower Starter Bracket that's almost new and ready for action! It's made of light weight billet aluminum and in excellent shape with no damage or repairs. This one's designed to works with the SSI, or Kobelco superchargers and can definitely help prevent a lot of grief on the starting line when it comes to installing or removing your blower starter quickly and efficiently. It never hurts to prepare, order this one for a spare!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
