Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an item that may be a little hard to find if you need a replacement! This pair of slightly Used Weld Racing Beadlock Rings is for the 16" wheels that utilize 24 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). Black anodized finish is in great condition and this pair is ready to throw down a number if you are!
Price is for 1 set. (2 pieces total.)
Another BRAND NEW item... Without the brand new price!!!
Waterman Fuel Pump Manifold
One more quality component to replenish your spare parts inventory would be this brand new Waterman Fuel Pump Manifold. And if you're running the mega bertha style pump then this is the one for you! This outlet replaces the damaged, leaking, or worn out one on the top of your fuel pump and works with your -12 fittings on top and -8 fittings on the sides. It's anodized black and can't wait to go to work for your race team right out of the box!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Fuel Pump Inlet
One more quality component to replenish your spare parts inventory would be this slightly Used Waterman Fuel Pump Inlet. And if you're running the little bertha, or super bertha style pumps then get ready to save! This inlet replaces the damaged, leaking, or worn out one on the bottom of your fuel pump and measures 1 1/4" diameter. It's made of billet aluminum, anodized red and free of any damage. Check us out first for all your hard to find racing components... You'll be glad you did!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Small
Lets get the job done for a lot less money, with this slightly Used AFT Slide Valve - Small style, designed for the medium size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Save time, save money, GoNitrolink.com!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Sanders Rear Racing Wheel Centers
Now here's a item that would be almost impossible to find at the race track if you needed them for spares! This set of slightly Used Sanders Rear Racing Wheel Centers is in almost new condition with very little use. Both the stud holes and the 15 total mounting bolt holes are in great shape and this set fits the popular 5 on 5.5 bolt pattern. And the great news is they can work on either an SFI 15.3 or 15.4 spec wheel with any offset. And that means if you're running the upgraded drive hub set-up required for NHRA pro competition or the standard hubs, either way this set has you covered! Freshen up that rear set on your race car, or that spare set in your race trailer with a couple clicks right here... Another job done!
Price below is for a set of 2.
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
We offer a complete line of all Automan products!
Billet Clutch Feeler Gauges
"Nitrolink" offers quality specialty pit tools made to last... And these Billet Clutch Feeler Gauges are definitely one of the nicest sets on the market! And the great news is you can hand select the exact sizes you need instead of buying a complete set that comes with several sizes you'll never use. How cool is that! Each one comes complete with a durable stainless steel blade that measures 10 3/4" long that's perfect for job. The hex shaped handle measures 1" long, is stamped with the correct size, offers a comfortable grip and designed to hold the blade securely in place while in use. Blades can be changed out quickly if damage occurs and can be purchased separately if they need to be replaced down the road. Available in .035, .040, .045, .050, .055, .060, .065, or .070 blade sizes. Another quality product to match your quality race team!
Price: $49.95 each
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
