"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive
Running 2 mags has to be twice the fun, right! But first, we need to make sure both are in sync and working together for optimum performance on race day! And that's were this brand new PSI Dual Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! The best kept secret is out, because now you know exactly where to go for all the cool race parts! GoNitrolink.com
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black
If your in the market for a new set of wheels that can perform on the race track just as good as they look! Then check out this brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black anodized for that awesome appearance we just can't get enough of! This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! If you have any further questions, just give us a call as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished
Picture your race car under the lights at night with a brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Polished finish. This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Order your new set today... Both you and your photographer will be glad you did!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black
Big Show Top Fuel Dragster or Nitro Funny Car Legal with upgraded SFI tags!!! This set of 16x16 Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black are already anodized for that awesome appearance we all admire! This set comes complete with the mandatory drive hub centers, required for NHRA pro category competition. They're brand new and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings are scalloped for lighter weight and utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Mount a set of these up and make a statement on race day that you're there to win!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Polished
Big Show Top Fuel Dragster or Nitro Funny Car Legal with upgraded SFI tags!!! This set of 16x16 Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Polished to offer a brilliant shine come complete with the mandatory drive hub centers, required for NHRA pro category competition. They're brand new and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. They utilize 24 bolts total on the outside, as well as the inside of the Beadlock Rings, that are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! And the polished finish would be the perfect choice for those photos of your race car on the starting line under the lights at night!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander 10 Spoke Funny Car Front Wheels - Polished
If you prefer the flash under the lights at night, then polished wheels are the way to go! This set of Sander 10 Spoke Funny Car Front Wheels - Polished for a brilliant shine are brand new and ready to offers your nitro, alcohol, or gas burning Funny Car, Altered, or Pro Mod, one of the latest style wheels on the market! So, if you're looking for that nostalgic look, you won't find it here! They're the standard 15 x 3.5 size, one piece billet aluminum models and can be ordered to fit either Anglia, or Strange (larger bearing) spindles. They have previsions to accept your front disc brakes, if you're running them. And are NHRA "tech friendly" with SFI 15.2 tags included. The great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. Order your set today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
