Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Red Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Red Rocker Stands are the popular standard ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Billet Burst Panel Deflector
Supercharger back-fire is something we all try to avoid at almost any cost... However in the event of one, why not attempt to prevent as much damage as possible, right! And that leads us to this Billet Burst Panel Deflector that installs easily and could possibly help prevent costly body or hood damage! It's durable, light weight and machined from billet aluminum and works with the standard size, 24 bolt burst panel frame. And can be installed to deflect debris or manifold pressure up or down depending on what type of race car you're running. Pair one of these up with a Nomex Plug Wire Saver for a little more added protection... Then drop the hammer!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used BAE Fuel Pump Extension
Another money saving product to help stretch your racing budget a little further is what you'll find right here with this slightly Used BAE Fuel Pump Extension that's ready to install and go racing! This one's in nice shape, free of any damage or repairs and made of billet aluminum. It's the standard 5 1/2" size that works in conjunction with your older style cast aluminum gear drive front covers such as Keith Black, BAE, or JP1. And fits over your fuel pump extension drive shaft, that runs off your cam gear (both sold separately). "Old School" style at a great price right here! GoNitrolink.com
Price
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Total
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Fire Bottle Actuator
It never hurts to carry around a few items you never think you'll ever need! And now that you've seen this brand new Fire Bottle Actuator right here... Well you know the rest! This one's from DJ Safety and equipped with a billet aluminum actuator arm. It's light weight, installs quickly and takes up very little space in your trailer while it waits to be pressed into service. GoNitrolink.com for all your hard to find spare items, so you're locked & loaded for race day!
Price
$155.00 – $175.00Price range: $155.00 through $175.00
Total
$155.00 – $175.00Price range: $155.00 through $175.00
"Nitrolink" offers a complete line of all Littlefield Supercharger products!
Billet Idler Pulley Assembly
If you're looking for a Billet Idler Pulley Assembly that checks all the boxes when it comes to performance, durability and craftsmanship, then take a look at this style made by Littlefield. This one's brand new and works with your 3" wide blower belt and available in either the small or large diameter size. It's manufactured from billet aluminum and profiled for a true finished look. It offers both strength and reliability on the race track and can work in conjunction with many of the popular roots style superchargers on the market. And was specifically designed to help prevent belt slippage at the most critical time during the run! Quality racing components 24/7 right here on our website!
Choose either small, or large diameter in the "options" menu below.
Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
Price
$177.95 – $214.95Price range: $177.95 through $214.95
Total
$177.95 – $214.95Price range: $177.95 through $214.95
Sleeve Hold Down Tubes
Check out this complete set of (4) Sleeve Hold Down Tubes that are available for either Fuel Heads, or Fatheads. This brand new set can be installed or removed quickly and fits right over your head studs to assure your sleeves stay in position while changing pistons. Add this handy tool set to your collection... Use them once and wonder how you ever managed without them! GoNitrolink.com for all your specialty pit tool needs!
Choose either Fuel Heads, or Fatheads in the "options" menu below.
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Blower / Injector Spacer
Slightly used, in great shape and ready to hopefully join you in the winners circle is this
Used Blower / Injector Spacer that installs quickly in between your blower case and injector. This ones made of light weight aluminum and equipped with 2 air bleed fittings on the front edge for fine tuning your idle setting. It measures 1" tall, o-ring ready on both sides and mounting holes measure 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. One more item off your check list that's in stock and ready to ship!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an item that may be a little hard to find if you need a replacement! This pair of slightly Used Weld Racing Beadlock Rings is for the 16" wheels that utilize 24 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). Black anodized finish is in great condition and this pair is ready to throw down a number if you are!
Price is for 1 set. (2 pieces total.)
