We offer a complete line of all Pit Pal products!
Air Hose Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And keeping your race trailer organized and efficient for the race weekend will be a whole lot easier with a brand new Air Hose Holder just like this one! It's heavy duty, made of durable aluminum, hand welded and built to last. Measurements are 6.5"H x 7.5"W x 5.5"D plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Hoses/Cords not included.
Billet Remote Starter Button
Supplying your race team with all the right equipment to make sure you're prepared on race day is what we do best! So, check out this brand new Billet Remote Starter Button that allows you to crank over your motor from the engine compartment to help streamline the process when it comes to checking compression, doing a leak-down, setting valves, or turning over your engine to get oil pressure. It's quickly connected to your starter motor or solenoid prior to use, then easily removed when your done... Specialty Pit Tools taken to the next level! GoNitrolink.com
WARNING: Fully disconnect any coil wire(s) prior to use to help avoid accidental start up's in gear!!!
Quick Release Breather Ends
If you're about ready to replace your tired worn out set and looking to save a few bucks at the same time... Then why not do it right here with this brand new set of Quick Release Breather Ends. These are made of billet aluminum, anodized black and work with the 1 3/4" size breathers without o-rings that are equipped with the quick release locking style pull pins. One more brand new product, without the brand new price! GoNitrolink.com
Sold as a set.
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
Heavy Duty Siphon Drum Pump
So, lets make the task of moving race fuel from the drum to your fuel jugs a whole lot easier with this brand new Heavy Duty Siphon Drum Pump to help get you ready for the long race weekend! This one moves approx up to 7 gallons per minute and is equipped with a 33" hose. It's compatible with most fuels, oils and solvents to help make your liquid transfer job quick, clean and easy... Save more, race more, win more! GoNitrolink.com
CAUTION: Not recommended for Alcohol Fuels.
Used Y-Block
Get ready to press this slightly Used Y-Block into service and save yourself a few bucks right at the step! This one's in nice shape, anodized black and already loaded with (2) -8's and (1) -12 fitting included. However, these sizes can be changed out easily enough using your ORB fittings to meet your size requirements. So, if you're getting ready to hit the road soon for the race weekend, at this price... Don't forget your spare! Save, Race, Win, Repeat! GoNitrolink.com
We offer a complete line of all Simpson Race Products!
Simpson Chin Strap
Help equalize those g-force effects right at the step with a brand new Simpson Chin Strap just like this one!!! This is the newest style, that's black in color and made of nylon. It's now equipped with a handy quick disconnect clip that allows it to be removed from the helmet instead of always hanging permanently off of it like the old style. Attach the opposite side to your safety harness, quickly adjust as desired, then drop the hammer... Save more, race more, win more! GoNitrolink.com
Wiggens -12 ORB Kit
Specially offered for the race team that pays extra attention to all the details! This slightly used Wiggens -12 ORB Kit is a super trick way of capping off any application that utilizes a -12 o-ring boss fitting with your existing hose that's equipped with a wiggens hose fitting. This size is most commonly used on the filter side of your oil pump that's already set up for wiggens style clamps on the oil filter hose. This kit comes into play whenever the oil hose is disconnected from the pump by eliminating those annoying drips and mess in your pit area. Simply remove the hose and replace it with this cap and clamp and you're done! Shop here, save money, race often! GoNitrolink.com
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
We offer a complete line of all Pit Pal products!
Pit Pal Aluminum Channel Installation Kit
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And now, lightweight trailer doors can take advantage of the different cabinets and racks we have to offer by installing a brand new Pit Pal Aluminum Channel Installation Kit for extra added bracing! And because trailer doors don't have studs for mounting, you can easily install channels to the outer door frame with support screws or rivets. Once in place, the product mounts to the channels creating no added stress to your doors surface. Each kit comes with 2 channel strips that measure 48"W x 3.25"H and either 20 screws or 16 rivets... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Choose hardware preference in the "Options" menu below.
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Chassis Stabilizer Storage Mount
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's help you get even more organized by offering a brand new Chassis Stabilizer Storage Mount just like this one, to help keep yours stored safely when not in use! It's made of .125 durable aluminum and measures 20"W x 1 7/8"D x 4"H. And the perfect solution to help keep your inflatable Chassis Stabilizer out of the way, yet ready to go. Plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Chassis saver sold separately.
