bae Archives - Page 10 of 34

Cylinder Heads , Engine , Misc.

Manton Custom Pushrods

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Manton Custom Pushrods

Individually handcrafted and inspected for ultimate performance!!! And when it comes to Supercharged, Turbo Charged, Nitrous, or Normally Aspirated Engines, Nitrolink offers Manton Custom Pushrods exclusively in a variety of different length, diameter, tip and cup sizes to meet your specific needs...

The extreme duty S-7 Tool Steel 3 piece style, is mainly used in Top Fuel, A Fuel, Blown Alcohol, Pro Mod, Nostalgia, Tractor Pulling, etc. And is the choice of champions for the majority of the pro nitro and alcohol teams on tour! They're specifically designed to work with extreme cylinder and spring pressures. And can be ordered in: 3/8″, 7/16″, 1/2″, or 9/16″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips are available in 8620 or H-13.

The Series 5 style is also used in Top Fuel, Pro Stock, Pro Modified, Blown Alcohol, Tractor Pulling, Sprint Car, Offshore Marine, Cup and LS Series. They're made with 4130/4135 chromoly tubing that's heat treated. And can be ordered in: 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, or 3/4″ diameter in any length with a straight tube or tapered, with any variation of taper. And a variety of tips available in 8620, H-13, or Copper Alloy Insert Cup. Shaft or pedestal style rocker arms should be used in conjunction with this series of pushrod because the tube is not case hardened for guide plate use...

The Strongest Pushrods available + Unmatched Customer Service = GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 anytime to order.

Clutch/Transmission/Drive-train , Misc.

Moore Performance Custom Input Shafts

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

We offer a complete line of all Rob Moore Performance Products!

Moore Performance Custom Input Shafts

Performance, Durability and the choice of Champions is what you're looking at right here! Check out these brand new Moore Performance Custom Input Shafts that are being offered in 3 popular sizes: 1 3/8" 10 spline, 1 3/4" 10 spline, or 1 7/8" 10 spline on the clutch pack side. They're sold separately and can be ordered to work with your Moore Performance or Lenco reverser if you're running direct drive. Or, Lenco or B&J transmissions, with your choice of either a large or small pilot size. They're made of heat treated steel and another example of craftsmanship at its finest! Next level, hi performance components 24/7 right here! GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.

Clutch/Transmission/Drive-train , Misc.

Moore Performance Reverser Output Shafts

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

We offer a complete line of all Rob Moore Performance Products!

Moore Performance Reverser Output Shafts

Quality second to none is exactly what you'll find right here! And these brand new

Moore Performance Reverser Output Shafts are the only choice of the majority of the pro nitro teams on tour for two reasons... Performance & Durability! These are sold separately and work specifically with the Moore Reverser. They're the standard 1 3/4" 40 spline style that's offered in 2 lengths: Large = 6" out from the reverser. Or, Small = 3.265" out from the reverser, with other custom lengths available. They're made of heat treated steel and are a work of art when it comes to craftsmanship! Hi performance taken to the next level, right here! GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.

Engine , Introducing...New Products , Misc. , Safety Equipment

Carbon Fiber Engine Containment Diaper

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Carbon Fiber Engine Containment Diaper

State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com

Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.

Cylinder Heads , Engine , Misc.

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.

Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com

Priced to move at: Only $4500.00 set.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

In the Pits , Misc. , Racepak

Racepak Pro 3A Computer System & Digital Dash

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Racepak Pro 3A Computer System & Digital Dash

Check out this Racepak Pro 3A Computer System & Digital Dash that's being offered as a "starter kit" to not only keep the price down... But to also offer it's new owner the chance to take full advantage of all the valuable tuning data Racepak Systems have to offer... And the great news is this system can be outfitted as you go, with only the functions you care to monitor, saving you BIG BUCKS at the same time!!!

The Racepak Data Logger and Components are as close to brand new as you can get, having been used for only one race. All items are in great shape and free of any damage or repairs. This system could work well on your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Top Alcohol Dragster or Funny Car, Pro Mod, Tractor Puller, Drag Boat and so on... It's capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure, Nozzle Pressure and Drive Shaft Speed as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Clutch Temp and a whole lot more if you choose. Recording time is 200 seconds, or more depending how you set it up. And it comes complete with Racepak Software, EGT Probes, Removable SD Cartridge, Applicable Cables & Boxes, Charger and HP Laptop Computer. (See photos.)

The Racepak Digital Dash is slightly used, in excellent shape and free of any damage. And is the exact Dash seen on a number of big name Top Fuel Dragsters and Nitro Funny Cars. Along with many of the Top Alcohol Cars as well. It can display any function that is being monitored by your Pro 3 Data Logger. And has a back-light display that can be toggled on for night racing if you choose. This Dash shows up to 36 different functions, in addition to the ever-present RPM bar on it's 3 separate display screens. The 4 sets of programmable displays allows the driver to choose only the functions he needs. The most common ones being Engine RPM, EGT's, Fuel Flow, Oil Pressure, Ignition Timing, Boost and Temperature. A super trick light weight Carbon Fiber Mounting Plate and Pro Dash Cable are also included to wrap up this very special package...

This System brand new from Racepak will set you back right at $15,000 bucks to duplicate! But not here... Not today! So, get ready to save big time as this one's priced to move and definitely ready to go to work! Install this hi performance component on your ride today... Then wonder how you ever got along without one!

Quality Racing Components + Unmatched Customer Service = GoNitrolink.com

Priced to move at: Only $10500. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Misc. , Supercharger

Fowler F-11 Cast 6-71 Blower

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Fowler F-11 Cast 6-71 Blower

A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com

Priced to move at: Only $3895. + shipping

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Misc. , Supercharger

Fowler F-11 Billet 6-71 Blower

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Fowler F-11 Billet 6-71 Blower

Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink

Priced to move at: Only $4995. + shipping

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

In the Pits , Misc. , Racepak

Racepak Pro 2 Computer System

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Racepak Pro 2 Computer System

Check out this slightly used Racepak Pro 2 Computer System that's ready to install on your Top Fuel Dragster, Nitro Funny Car, Blown Fuel Altered, Top Alcohol Dragster or Funny Car, A/ Fuel, Tractor Puller, Drag Boat and so on. And we'll make sure your set up with some of the most popular functions so your team can start taking full advantage of all the valuable tuning data Racepak Systems have to offer... And lets get it done right here for one low price!

To start off, both the data logger and components are in very nice shape and free of any damage or repairs. In fact, we'll throw in a bunch of brand new components (listed below) to make this deal that much better. This system is capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure and Nozzle Pressure as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Drive Shaft Speed, Clutch Temp and a whole lot more later down the road if you choose. Data logger recording time is 200 seconds and this system can work with your Racepak Digital Dash (not included) if you choose. And the kit comes complete with Racepak Software, EGT Probes, Applicable Cables & Boxes and a brand new Removable SD Cartridge & Reader, brand new On/Off Switch, brand new Charger, brand new internal battery in the datalogger and everything you see in the photos.

A Pro 2 System, identical to this one brand new from Racepak sold for right at $11,000 bucks! But we'll make sure you get set up for thousands less right here! So, get ready to save big time as this one's priced to move and definitely ready to go to work...

All the right tools to get the job done on race day, right here! GoNitrolink.com

Priced to move at: Only $6795. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

In the Pits , Misc. , Racepak

Racepak Pro 1 Computer System

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Racepak Pro 1 Computer System

Check out this slightly used Racepak Pro 1 Computer System that's perfect for all our valued customers on a budget, that are ready to start taking full advantage of all the valuable tuning data Racepak Systems have to offer! And we'll make sure you're set up with some of the most popular functions without having to spend anywhere near $10 grand to do it!

To start off, both the data logger and components are in very nice shape and free of any damage or repairs. They're ready to install on your 7.0 Pro Dragster or Altered, Nostalgia

A/ Fuel Car, Blown Fuel Altered, Doorslammer, Tractor Puller, Drag Boat and so on. The Datalogger is equipped with dual fiber optic input ports and is capable of recording Engine RPM, Individual Exhaust Temp, G-Meter, Blower Boost, Oil Pressure, Fuel Pressure, Drive Shaft Speed and TDC as is. However, future upgrades can easily be added to monitor Fuel Flow, Manifold Temp, Pan Pressure, Clutch Temp and a whole lot more later down the road if you choose. Data logger recording time is 50 seconds. And the kit comes complete with Racepak Software, EGT Probes, Applicable Cables & Boxes, On/Off Switch and a brand new Removable SD Cartridge & Reader, brand new Charger, brand new internal battery in the datalogger and everything you see in the photos...

Helping your team race for less, is what we do best! GoNitrolink.com

Priced to move at: Only $2995. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Clutch/Transmission/Drive-train , Misc.

Molinari Titanium Pedal Clutch

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Molinari Titanium Pedal Clutch

Top of the line hi-performance is what you're looking at right here with this state of the art upgraded Molinari Titanium Pedal Clutch that's available immediately and ready to take your clutch program to the next level! This one's the 10.5 size, 6 large stand style, that utilizes 3 disks. It was made by Molinari Racing Products and features an all titanium pressure plate, donut and 426 hemi flywheel. Plus, it's as close to being brand new as you can get, with only 1 race! It's free of any damage or repairs and comes complete with a slightly used set of ARP flywheel bolts and a dial indicator with case that are also included as well. And here's more great news...

1. This one's in stock and ready to ship immediately... Zero wait time!

2. Save almost a "grand" off the new price, buying this one right here!

3. The road to the winners circle is shorter than you think! GoNitrolink.com

Priced to move at only: $9500. + shipping.

Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.

Clutch/Transmission/Drive-train , In the Pits , Misc. , Specialty Pit Tools

Clutch Pack Loader

Price

Call for Price

Quantity

- +

Total

Call for Price

Information

Buy Now

Quick View

Add to Wishlist

Clutch Pack Loader

Helping your race team stay efficient and organized on your journey to the winners circle is what we do best! And adding a brand new Clutch Pack Loader like this one to your program is sure to check both of those boxes! This heavy duty tool is professionally made of aluminum with billet components and anodized black. It completely eliminates having to install each disk and floater separately, one at a time. Just load your complete clutch pack with both disks and floaters directly on to the loader. Then carry everything out to the car, then slide everything off the loader using your clutch pack line up tool (sold separately) for a much quicker, more efficient installation. It comes equipped with a handle at the top and billet stands on the bottom so it sits upright next to the car ready to go to work! And can be ordered to work with your 10", 10.5", or 10.7" clutch component sizes, equipped with either 1/2", 9/16", or 5'8" size flywheel studs. Also choose your stand count: 6, 8, or 9 stand. And your disk count: 2, 3, 4, 5, or 6 and you're all set... Save more, Race more, Win more! GoNitrolink.com

Price: Only $325.00 + Shipping.

Please note: Multiple configurations available. Please call: (916) 425-1427 to purchase.

New parts listed daily, so keep checking back.

Phone:

Phone:

New parts listed daily, so keep checking back.

New parts listed daily, so keep checking back.

bae

Manton Custom Pushrods

Moore Performance Custom Input Shafts

Moore Performance Reverser Output Shafts

Carbon Fiber Engine Containment Diaper

Alan Johnson Stage 1 Nostalgia Cylinder Heads

Racepak Pro 3A Computer System & Digital Dash

Fowler F-11 Cast 6-71 Blower

Fowler F-11 Billet 6-71 Blower

Racepak Pro 2 Computer System

Racepak Pro 1 Computer System

Molinari Titanium Pedal Clutch

Clutch Pack Loader

Join Us:

Join Us:

Information

Subscribe to receive advanced notice!!!

We Accept:

Nitrolink Racing T-Shirts

Don't see what you need?