RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Turn-Key Race Trailer
If you're looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the "budget friendly" price on this one...
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the "important" tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor's logo, lettering, or vinyl wrap if you choose... So let's get to it!!!
About the Trailer...
2014 Continental Cargo 28' Race Trailer
• Usable Floor Space measures: 306" long x 81" wide (between fender wells)
• Rear Door measures: 95.5" wide x 80" tall
• Double Side Doors measures: 77" tall x 46" wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71" long x 23 1/2" deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3' long x 80" wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More...
This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch... Now you're ready to hit the road and join the 2026 season!!!
Priced to move at: Only $18,500 OBO
For more info, or to see in person call Brandon at: (916) 425-1427 anytime!
BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
Nitrolink "Funny Car" Decals
Get em while they're hot!!! Official Nitrolink "Funny Car" Decals are finally here... And ready to ride along with you as you chase your dreams into the winners circle! They measure 8" across and available in 2 styles, Top Fuel Dragster or Nitro Funny Car... Be the first to show your support for the coolest place on the planet to buy racing parts!!! And don't forget to check out the other "Nitrolink Merch" items that are sure to be a hit once they hit the race track!
Choose Dragster or Funny Car style in the "options" menu below when ordering.
(Sold separately)
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
Nitrolink "Top Fuel Dragster" Decals
Get em while they're hot!!! Official Nitrolink "Top Fuel Dragster" Decals are finally here... And ready to ride along with you as you chase your dreams into the winners circle! They measure 8" across and available in 2 styles, Top Fuel Dragster or Nitro Funny Car... Be the first to show your support for the coolest place on the planet to buy racing parts!!! And don't forget to check out the other "Nitrolink Merch" items that are sure to be a hit once they hit the race track!
Choose Dragster or Funny Car style in the "options" menu below when ordering.
(Sold separately)
Manifold End Seal Strips
"Nitrolink" offers a wide variety of hard to find items for all our valued customers! And these Manifold End Seal Strips are one more example! They're sold separately and measure 3/4" wide x 9 5/16" long and are available in either thick or thin size. They quickly install with high temp silicone on top of your aluminum end rails on your engine block to seal up the valley between your intake manifold and block. And at this price, don't forget your spares!
Choose either thick or thin size in the "options" menu below.
Price
$2.95 – $4.05Price range: $2.95 through $4.05
Total
$2.95 – $4.05Price range: $2.95 through $4.05
itrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fat Heads
If you're running a set of fat heads on your race car, then here's a perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fat Heads at a great price! This set of (14) total is made of durable steel, zinc coated and the 1/4" -28 fine thread size to work with your fat heads, with your choice of either a serrated or non-serrated flange. Add a set of 1/4" fine thread valve cover studs to your cart and you're all set for race day!
Choose either serrated, or non-serrated flange in the "options" menu below.
Price
$3.50 – $6.20Price range: $3.50 through $6.20
Total
$3.50 – $6.20Price range: $3.50 through $6.20
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fuel Heads
If you're running a set of fuel heads on your race car, then here's the perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fuel Heads at a great price! This set of (20) total is made of durable steel, zinc coated, with your choice of either a serrated or non-serrated flange. And available in either the 1/4" -28 fine thread, or the 5/16" -24 fine thread size to work with your fuel heads. Add a set of either size valve cover studs to your cart so you're all set for race day!
Choose size needed and serrated, or non-serrated flange in the "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Oil Pan Nuts
If you're running a AJ, Brad, or Keith Black block and are looking for a great deal on a complete set of brand new Hemi Oil Pan Nuts then look no further! These sets are made of durable steel, zinc coated and can be ordered in either the 5/16" -24 fine thread size, or the 5/16" -18 coarse thread size. And both come with a serrated flange for a secure fit. This popular item comes in a package of (24) total, so it's enough to work on either BAE or TFX blocks with any brand of 426 hemi oil pan on the market. And should be replaced with a fresh set every so often for optimum performance. Now you know exactly where to go for all your specialty hardware!
Choose either fine thread, or coarse thread in the "options" menu below.
Price
$8.40 – $18.30Price range: $8.40 through $18.30
Total
$8.40 – $18.30Price range: $8.40 through $18.30
Rocker Adjuster Nuts
...And if we offer the adjusters here on GoNitrolink.com then we better offer these brand new Rocker Adjuster Nuts to go with them, right! This popular item comes in your choice of either 3/8" or 7/16" size and works in conjunction with your rocker adjusters on your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. They're top quality precision machined, made in the U.S. and ready to help keep your rocker arms properly adjusted so you can put down a number!
Choose either 4 total, or 8 total in the "options" menu below.
Price
$8.50 – $9.95Price range: $8.50 through $9.95
Total
$8.50 – $9.95Price range: $8.50 through $9.95
Stainless Nut & Bolt Trays
The race car is only one part of the equation... Paying close attention to the small details in your pit area, in your race trailer, or at your race shop is also what helps get your team in the winners circle on race day! And these durable, high quality Stainless Nut & Bolt Trays are exactly what's needed to help achieve that professional look and keep everything organized and in it's place. The large size is 9.5" x 5.5" x 2.5" making it perfect for holding rocker arms, lifters, or larger size bolts. The small size is 6" x 3.25" x 2.5" and works great for bellhousing nuts, rear wheel lugs, oil pan, valve cover, or manifold nuts, or header nuts or bolts. They clean up in a flash and also work great for washing parts quickly with brake cleaner or solvent... Quality racing components, specialty pit tools and support equipment 24/7 right here!!! GoNitrolink.com
Sold Separately.
Choose large or small size in the "options" menu below.
