Price
$136.50 – $160.00Price range: $136.50 through $160.00
Total
$136.50 – $160.00Price range: $136.50 through $160.00
Enderle 3-Way Fuel Shut-Off
It's small, lightweight and flows the full line size! That's the best way to describe this brand new Enderle 3-Way Fuel Shut-Off that easily installs between your fuel pump outlet and metering valve, with the outlet on the side returning fuel back to the tank. When in the "off" position, it allows you to turn the engine over to adjust valves, check timing marks, etc; without feeding fuel into the engine. It's equipped with a pump fitting and can be ordered with either -6, or -8 size flared fittings, your choice! Cable clamp also included. GoNitrolink.com for unmatched customer service anywhere!
Choose either -6, or -8 size in the "options" menu below.
Enderle Throttle Arm - Double End
Keep that blower injector performing at its best with this brand new Enderle Throttle Arm - Double End. This one can be ordered in either 5/16" splined shaft size for Bugcatcher Injectors, or 7/16" size for Bird or Buzzardcatcher Injectors. It's made of light weight billet aluminum and anodized black for that stealth look... GoNitrolink.com for all your high performance replacement parts!
Choose shaft size needed in the "options" menu below.
Header Bracket Pins
And if we offer the super trick titanium header brackets here at gonitrolink.com then we better off the brand new stainless steel Header Bracket Pins to go with them, right! This is the exact size needed to work with the TAK titanium header brackets. They're precision made, sold separately and ready to hold your restraint straps in place... And look mighty fine doing it!
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Replacement Fuel Hydrometer
Great news!!! "Nitrolink" carries all the replacement parts for the Deluxe Hydrometer Kits just in case! No need to worry if something was broken in the heat of battle on race day because this brand new Replacement Fuel Hydrometer is easily replaced right here on our website! These Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading and are available in 4 different ranges. Unmatched customer service available right here! GoNitrolink.com
Choose the range needed in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Replacement Fuel Flask
Great news!!! "Nitrolink" carries all the replacement parts for the Deluxe Hydrometer Kits just in case! No need to worry if something was broken in the heat of battle on race day because this brand new Replacement Fuel Flask is easily replaced right here on our website! The large diameter design is perfect for pouring fuel in an out of and is less prone to tipping over. Unmatched customer service available right here! GoNitrolink.com
Replacement Fuel Thermometer
Great news!!! "Nitrolink" carries all the replacement parts for the Deluxe Hydrometer Kits just in case! No need to worry if something was broken in the heat of battle on race day because this brand new Replacement Fuel Thermometer is easily replaced right here on our website! This durable stainless steel dial thermometer is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. Unmatched customer service available right here! GoNitrolink.com
TAK Titanium Header Brackets
GoNitrolink.com for both racing products and customer service taken to the next level! And if you're looking for some state of the art TAK Titanium Header Brackets that will perform on the racetrack as well as they look, then your shopping in the right place! These are slightly used, made of light weight titanium and profiled like no other set on the market. They install easily on your header studs on your cylinder heads and work in conjunction with your blower restraint set-up. They're sold separately and if you need the exact size quick release pins that go with these brackets, we can do that as well! Order both quickly and easily right here!
Price: Only $79.00 each.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an item that may be a little hard to find if you need a replacement! This pair of slightly Used Weld Racing Beadlock Rings is for the 16" wheels that utilize 24 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). Black anodized finish is in great condition and this pair is ready to throw down a number if you are!
Price is for 1 set. (2 pieces total.)
Cylinder Head Intake Runner O-Rings
GoNitrolink.com for all your consumables! And we'll help save you both time and money by offering products like this brand new set of (8) total Cylinder Head Intake Runner O-Rings to help keep everything sealed up so you're ready for the next round! And we'll make it super simple to order everything right here. Just a couple clicks and it's done!
Another BRAND NEW item... Without the brand new price!!!
Clark 426 Hemi Head Gaskets - 4.310
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Clark 426 Hemi Head Gaskets - 4.310 for all you racers out there running fatheads! These are the copper style, for the 4.310 bore, that measure .42 thickness and ready to be pressed into service the minute you say go! Just a couple clicks and they're on the way!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Crank Bolt - Short
This next item is sure to save you both time and money not having to buy new elsewhere! So lets offer this slightly Used RCD Crank Bolt - Short style that measures 1 1/4" long from the flange and has a 3/4" thread diameter. This one's in nice shape and works with your 1" size wrench. And is responsible for attaching your crank hub to your crankshaft. At this price, you can't afford not to carry a spare... Order one today!
