Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used MSD Pro Mag 44 Wire Retainer
Here's another popular item for all our valued customers on a budget! This slightly
Used MSD Pro Mag 44 Wire Retainer part #7409 is the perfect item to pair up with the Pro Mag 44 Big Cap. It's one and only job is to keep all wires securely attached to each wire terminal while you break the beams at the other end! It installs easily, removes quickly with mounting hardware included. Order today and save!
"Nitrolink" offers a complete line of all Moore Performance Products!
Moore Performance Reverser
Quality craftsmanship, durability and performance!!! This state of the art brand new
Moore Performance Reverser checks all the boxes in these 3 categories... And here's the proof! This is the exact component being used by most every "Big Show" top fuel and nitro funny car team out there! Along with the majority of the A/Fuel Dragsters and Alcohol Funny Cars, simply because it works! Lets start with the sleek looking, finished billet aluminum case. This low profile design is anodized black and the lightest available on the market. And can be ordered with a bellhousing style, or cannon style mount. Each unit comes loaded with a 1 3/4", 40 spline steel output shaft for maximum strength under the highest extreme racing conditions that only 11,000 horsepower can produce. On the race track, this Reverser has delivered unmatched reliability for over 24 years. And comes complete with a built-in air actuated neutral safety feature required for NHRA pro competition to complete this very special package. Order yours today! Or give us a call with any questions, as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Billet Dry Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Dry Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive! And could work just as well for your team! They can be set up to work on your "Big Show" Funny Car, Alcohol Funny Car, Pro Mod, etc. And can be ordered in 2 basic sizes, either 1.8 or 2.1 gear sizes. Pump is loaded with you're standard 5/16" size drive and equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And can be set with two adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) and also includes two AN -12 IN/OUT fittings for the filter and stainless hard loop line. Give us a call with any questions as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
We offers a complete line of all PSI Supercharger products!
PSI Billet Mag Clamp
"Nitrolink" is your one stop shop when it comes to anything PSI! So why not let us help you keep your Magneto locked in place to help insure a consistent tune-up! This PSI Billet Mag Clamp is anodized black and offers quality second to none and installs and removes easily. It's made of light weight billet aluminum and comes complete with all hardware needed to keep your mag from moving during the run. Timing is everything on race day... And timing can't be more perfect to order one right here today!
We offers a complete line of all PSI Supercharger products!
PSI Mag Drive Bronze Gear Replacement
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best to help get you in the winners circle! This
PSI Mag Drive Bronze Gear Replacement offers unmatched quality, is easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive Replacement Belt
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best, to help get you in the winners circle! This PSI Single Mag Drive Replacement Belt is one of those items that can side line you quicker than your best E.T. And we sure don't want to see that! These Belts are easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
We offers a complete line of all PSI Supercharger products!
PSI Dual Mag Drive Replacement Belt
"Nitrolink" is your one stop shop when it comes to PSI replacement parts! So why not let us help you keep your Magneto performing at it's best, to help get you in the winners circle! This PSI Dual Mag Drive Replacement Belt is one of those items that can side line you quicker than your best E.T. And we sure don't want to see that! These Belts are easy to replace and can save you a whole lot of grief on race day if you have a spare ready to put into service if needed. Race weekends are way to short to be put on the trailer early because you couldn't make the call, so don't forget your spares!
