"Nitrolink" is you're one-stop shop for all Clevite Engine Bearings!
Clevite CB-1512VU (30) Hemi Upper Rod Bearings
These Clevite CB-1512VU (30) Hemi Upper Rod Bearings are sold in a pack of (30) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite products are know for, they are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!
Racers Discount pricing available! Call: (916) 425-1427 anytime to order.
Bearings available for Hemi, Chevy, or Ford.
Nitrolink is you're one stop shop for all Clevite Engine Bearings...
Clevite CB-1512VL(30) Hemi Lower Rod Bearings
These Clevite CB-1512VL(30) Hemi Lower Rod Bearings are sold in a pack of (30) and are the standard when it comes to offering a more affordable alternative without the coating. While still providing unmatched quality and performance Clevite Products are know for. They are built on an un-plated, hardened-steel backing for better dimensional accuracy and bore contact. And offer a low-to-medium eccentricity. Manufactured with a lead-indium surface alloy, which allows them to conform better for a precise fit. This style Bearing is by far the most popular with racers competing in a wide variety of classes everywhere!
Racers Discount pricing available! Call: (916) 425-1427 anytime to order.
Bearings available for Hemi, Chevy, or Ford.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson Stage 5 Billet 426 Hemi Heads
Check out this nice set of Alan Johnson Stage 5 Billet 426 Hemi Heads perfect for use on your Top Fuel Dragster, Nitro Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on. This slightly used set is in excellent shape and works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your standard deck fuel head style manifold. They're the .100 tall style and accept your 2.450 size intake and 1.925 exhaust valves, (not included). Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are already machined for o-rings and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Why Buy New??? So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $2195.00
BRAND NEW SET!!! TOP FUEL & NITRO FUNNY CAR LEGAL!!!
Titanium Valve Covers
Quality and craftsmanship that's second to none! "Nitrolink" is excited to offer these BRAND NEW complete sets of current style 426 Hemi Titanium Valve Covers legal for both Top Fuel Dragster and Nitro Funny Car pro competition...
Absolutely no expense was spared in research, design and development to assure these state of art Valve Covers not only perform as well as they look on the race track. But also back in the pits in between rounds during routine maintenance on the race car. They're definitely one of the nicest, well fitting sets available on the market today. And when it comes to performance and durability, some of the biggest names in Drag Racing won't even consider using any other brand! This is the exact set-up many of the pro nitro teams on tour are flying across the beams at over 300 MPH with. Made to order from high quality titanium, this set of Valve Covers comes complete with all hardware shown in the photos. They're NHRA "tech friendly" with fresh SFI 14.4 tags to meet current Top Fuel/Nitro Funny Car pro specs. And are equipped with titanium shields that fold down for quick easy access to all spark plugs and plug wires during service in between rounds. Custom made latches and hinges included assure a secure fit when both shields are folded up and locked into place after service. Custom made breathers are also included and outfitted with super trick Wiggins clamps to insure easy removal and a secure fit. A total of (16) custom made high quality billet spark plug tubes, as well as a set of (20) Valve Cover nuts and studs are also included to complete this very special package. We're always here to help, so give us a call anytime to discuss how we can get your new set started today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Adjustable AN Fitting Line Wrench
Attention all Crew Chiefs... Before you tow up to the starting line, make sure you're fully prepared with an Adjustable AN Fitting Line Wrench just like this one. We've all seen it before... A Driver being told to shut off because of a loose fitting prior to a run. And more often than not, this style wrench might have made all the difference! Top quality craftsmanship second to none is offered right here with a finish and feel that make this handy pit tool the first one out of the tool box on race day. The anodized red finish makes it easy to spot. And it's thin light weight profile and handy end hook make it perfect for storing in your pocket or attaching it to your belt. It adjusts to a tight fit on any AN Fitting from -3 to -12 size. And is equipped with a handy Dzus Button Tool at the end of the handle that just eliminated having to carry yet another tool. So, you know how it works... Now that you've seen it... Guess what tool you'll wish you had the next time you go racing! Order yours today!
Priced to move at: Only $99.95
Anton Paar Digital Nitro Checker
Check out this state of the art brand new Anton Paar Digital Nitro Checker that's the most current style Portable Density Meter on the market today. It's the Ex-Petrol model, loaded with the upgraded internal components required for nitromethane use. And used by many of the big name Pro Nitro and A/Fuel Teams on tour. Also used by NHRA Techs at all the major events. It instantly measures the density and concentration of your nitro sample with the highest level of accuracy possible. Completely does away with time consuming, "old school" nitro test kits that use the fragile glass flasks, hydrometers and thermometers. This high tech racing instrument is sure to give your race team the advantage by saving valuable time in between rounds by delivering instant accurate one-handed measurements when mixing nitro to obtain the desired percentage for your next run. It's rugged leak-proof housing, compact lightweight design (2 lbs.) and is user friendly to assure easy operation. It's equipped with a large back-lit LC display for night racing. Allows for no-hassle measurements of hard-to-reach samples straight out of the fuel tank, from fuel jugs, or right out of the drum.
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas Synthetic 140 Racing Gear Oil
To meet or exceed the demands of a 300+ MPH Top Fuel Dragster or Nitro Funny Car rear end gear set, you need to add a product that's second to none! Lucas Synthetic 140 Racing Gear Oil is used by many of the pro nitro and alcohol teams on tour simply because it works. It's specifically designed for high horsepower, high torque conditions. And made from the highest quality heavy synthetic base oils, proprietary package of additives and extreme pressure lubricants specifically engineered to meet the demands of these severe racing conditions.
Sold by the jug, or by the pail.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 70 Plus Racing Oil
Developed for use on Nitro and Alcohol Engines, the "Plus" is for the extra additives above and beyond those found in ordinary racing oils. Lucas 70 Plus Racing Oil contain special Lucas additives that resist breakdown and contamination from exotic fuels such as nitro and alcohol. All "Plus" Oils resist thinning out at high crank-case temperatures. And are fortified with extra zinc for severe racing applications, with the 70 plus having the highest zinc content. Reduced engine wear makes your crew chief look like a hero... So order today!!!
Sold by the jug, by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 60 Plus Racing Oil
Developed for use on Alcohol Engines, the "Plus" is for the extra additives above and beyond those found in ordinary racing oils. Lucas 60 Plus Racing Oil contains special Lucas additives that resist breakdown as alcohol tends to act like a solvent that could effect lesser lubricants. All "Plus" Oils resist thinning out at high crank-case temperatures. And are fortified with extra zinc for severe racing applications. Reduced engine wear makes your crew chief look like a hero... So order today!!!
Sold by the jug, by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 50 Plus Racing Oil
Thin may be "in" with some racing applications where fractional power improvements can be crucial. The first victim of fuel dilution is viscosity so Lucas 50 Plus Racing Oil adds dispersants along with enhanced zinc levels to minimize the effects of fuel dilution on engine component wear. At the extreme ends of drag racing where the Top Sportsman cars live, something as basic as sufficient oil pressure from this quality product could be the difference between heading to the winners circle, or heading home...
Sold by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
