Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Black Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Black Rocker Stands are the extreme duty style, available in either hi ratio or standard ratio. They're made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose end stand style or oiler style in the "options" menu below.
Choose hi ratio or standard ratio in the "options" menu below.
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Silver Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Silver Rocker Stands are the hi ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Blue Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Blue Rocker Stands are the upgraded heavy duty standard ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Red Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Red Rocker Stands are the popular standard ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 57T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 57T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Billet Burst Panel Deflector
Supercharger back-fire is something we all try to avoid at almost any cost... However in the event of one, why not attempt to prevent as much damage as possible, right! And that leads us to this Billet Burst Panel Deflector that installs easily and could possibly help prevent costly body or hood damage! It's durable, light weight and machined from billet aluminum and works with the standard size, 24 bolt burst panel frame. And can be installed to deflect debris or manifold pressure up or down depending on what type of race car you're running. Pair one of these up with a Nomex Plug Wire Saver for a little more added protection... Then drop the hammer!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
