Price
$179.99 – $259.99Price range: $179.99 through $259.99
Total
$179.99 – $259.99Price range: $179.99 through $259.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle BBC Front Cover
Now here's an item that all you Big Block Chevy racers out there on a budget can definitely get some use out of! This brand new Enderle BBC Front Cover offers both performance and nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. This cover uses a standard BBC front seal (sold separately). Add one of these to your shopping cart right here... A couple clicks after that and it's on it's way!
Choose cast aluminum or polished finish in the "options" menu below.
Price
$136.50 – $160.00Price range: $136.50 through $160.00
Total
$136.50 – $160.00Price range: $136.50 through $160.00
Enderle 3-Way Fuel Shut-Off
It's small, lightweight and flows the full line size! That's the best way to describe this brand new Enderle 3-Way Fuel Shut-Off that easily installs between your fuel pump outlet and metering valve, with the outlet on the side returning fuel back to the tank. When in the "off" position, it allows you to turn the engine over to adjust valves, check timing marks, etc; without feeding fuel into the engine. It's equipped with a pump fitting and can be ordered with either -6, or -8 size flared fittings, your choice! Cable clamp also included. GoNitrolink.com for unmatched customer service anywhere!
Choose either -6, or -8 size in the "options" menu below.
Heavy Duty Funnel & Screen - Economy
Weather you're running nitro, alcohol, or gas! This brand new Heavy Duty Funnel & Screen - Economy style can handle it all! It's giant 6 quart (1.5 gallon) capacity and heavy gauge, corrosion proof polyethylene plastic make it perfect for fueling your race car quickly. It's equipped with a rust-proof fine mesh brass filter screen that's heat sealed in place for long wear and helps keep unwanted debris out of your fuel system. It's one more quality product to help you save money and get the job done the way you need it!
Wiggens -12 ORB Kit
Specially offered for the race team that pays extra attention to all the details! This slightly used Wiggens -12 ORB Kit is a super trick way of capping off any application that utilizes a -12 o-ring boss fitting with your existing hose that's equipped with a wiggens hose fitting. This size is most commonly used on the filter side of your oil pump that's already set up for wiggens style clamps on the oil filter hose. This kit comes into play whenever the oil hose is disconnected from the pump by eliminating those annoying drips and mess in your pit area. Simply remove the hose and replace it with this cap and clamp and you're done! Shop here, save money, race often! GoNitrolink.com
Used RCD Splined Pulley Spacers - Nylon
Attention all race teams running the quick change blower pulleys! We have plenty of slightly Used RCD Splined Pulley Spacers - Nylon that are in nice shape and ready for action! These are the nylon style that are available in .30 thickness. So don't delay, order today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Magnesium Dual Mag Support
It's durable, light weight and priced to move! This slightly Used Magnesium Dual Mag Support is in nice shape and works with your angled idler assembly. It was designed to lock down and support your dual mag drive and bolts behind your idler plate. The top, made of aluminum does not match the magnesium base. However, it's priced accordingly and sure gives you the opportunity to save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Titanium Quick Change Bottom Pulley Nut
This slightly Used RCD Titanium Quick Change Bottom Pulley Nut is the one item responsible for making the whole process "quick" and easy! This one's in very nice shape and works with the splined style bottom blower pulleys. And allows your team to make a last minute pulley swap in the lanes just before you're ready to fire! It works in conjunction with your RCD threaded style crank hub and can be used with pulley spacers if you choose. It's durable light weight and ready to visit the winners circle!
Another BRAND NEW item... Without the brand new price!!!
Waterman Fuel Pump Manifold
One more quality component to replenish your spare parts inventory would be this brand new Waterman Fuel Pump Manifold. And if you're running the mega bertha style pump then this is the one for you! This outlet replaces the damaged, leaking, or worn out one on the top of your fuel pump and works with your -12 fittings on top and -8 fittings on the sides. It's anodized black and can't wait to go to work for your race team right out of the box!
Price
$1,499.95 – $1,549.95Price range: $1,499.95 through $1,549.95
Total
$1,499.95 – $1,549.95Price range: $1,499.95 through $1,549.95
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Aluminum Flow Meters
In drag racing knowledge creates power... And having access to valuable data during a run helps assist you in knowing exactly how to manage it! And that's exactly what these brand new Racepak Aluminum Flow Meters do best! This high performance turbine-style racing component is the aluminum style primarily recommended for nitro applications. It delivers an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump and also confirms the function of your fuel timers and fuel system lean-outs. Flow Meters can also be used to monitor your hydraulic clutch system flow if you choose, so you can look at that as well. They're available in three sizes, to work with your -8, or -12 lines. Why not take advantage of all the data you can get to help fast-track your journey to the winners circle! Order yours today!
Choose -8, or -12, in the "options" menu below.
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Non Pass-Thru Analog Box Circuit Board
This brand new Racepak Non Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It a replacement for the main circuit board in your non pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Pro Dash Cover Lens
This slightl Used Pro Dash Cover Lens is a great item to have as a spare and works with your Westco bottom base unit. It was designed to help protect your Racepak Pro 2 dash from fuel and oil spills, dirt, tools, etc. However, it will not work on the Pro 3 dash. It's the perfect item for protecting your investment, so keep that pro dash alive and well! Click, order, done!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Sensor Cable
This slightly Used Racepak Sensor Cable works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects different sensors such as front wheel speed, drive shaft RPM, or wheelie bar first to your input box, then to your data logger. It can also work with your linear's as well. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Supply is limited! Choose from the lengths available in the "options" menu below.
