Used RCD Blower Snout & Coupler
If you prefer to run name brand components on your race car, then check out this
Used RCD Blower Snout & Coupler that's in great shape and sure to deliver the quality and craftsmanship you've come to expect! This one's the 6 bolt style that measures 6 1/4" long. It's in very nice shape with no damage or repairs. And the polished finish has a nice brilliant shine with only slight nicks and scratches from normal use. Coupler included is also in nice used shape with no visible spline damage, etc. Grab your hardware (not included) and install this one right out of the box! "Supercharged Savings" daily at GoNitrolink.com
Priced to move at: Only $325.00
Lapping Plate Sand Paper Sheets
Keep that brand new Lapping Plate earning its keep with an extra supply of Lapping Plate Sand Paper Sheets specifically fitted for the plate itself. These sheets are equipped with the popular 60 grit surface needed, with an adhesive backing for a secure fit. Each sheet is sold separately and when used with the lapping plate, it's one of the most effective ways to help assure that your blower and manifold are working together for optimum performance! And we'll make it quick and easy to order yours right here... Job done!
IN STOCK & READY TO SHIP!!!
Used Blower Starter
Here's another quality component for all our valued customers on a budget! And when it comes to "go time" on the starting line, then lets get this slightly Used Blower Starter pressed into service on your team! It's in great shape, free of any damage with normal use and could work with your 36 or 48 volt battery pack. It was recently tested, good to go and equipped with an aluminum cage and hand wheel. And the great news is, this one features the black, universal style anderson plugs that interchanges with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. So, if you're ready to save BIG TIME not buying new elsewhere! Grab this one up today, right here on our website... Just a couple clicks... Done!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Starter Cables
Let's offer some more starting line equipment, to make sure we have you covered on race day! Check out this nice set of Used Blower Starter Cables that are ready to join your race team immediately! This set measures 10 feet long and could work well on the starting line if your using a remote battery pack that sits close to the car. They come complete with a black protective cover to help prevent cable damage. And the great news is, they're also equipped with the black, universal style anderson plugs that interchange with any of the other color plugs out there. And this upgraded feature alone could possibly save you on the starting line if you ever need to use another teams battery pack at the last second. Quality racing components offered 24/7 right here on our website! GoNitrolink.com
BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Fowler F-11 Cast 6-71 Blower
A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com
Priced to move at: Only $3895. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Manifold Lapping Plates
Keep that supercharger on your race car performing at it's best with one of the nicest Manifold Lapping Plates on the market to help keep it flat and true! This heavy duty high quality specialty tool is brand new and the perfect item to have at your race shop, or in your pit area on race day to help your manifold provide a nice even surface for a complete seal. This one's made of billet aluminum and comes complete with 1 disposable self adhesive sheet of sand paper. (Extra sheets sold separately). It measures 1" thick and is equipped with 2 comfortable handles to help deliver a consistent result. It stores away nicely in your race trailer or shop and ready to go to work right when you need it most! Top quality right here! GoNitrolink.com
Extra sheets of sand paper are also available right here on our website.
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
