Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Price
$45.99 – $81.99Price range: $45.99 through $81.99
Total
$45.99 – $81.99Price range: $45.99 through $81.99
We offer a complete line of all Racers Tape Products!
With over 30 years in the tape industry, Racers Tape has been front and center when it comes to meeting the harsh conditions that race teams in all motor sports have to offer. So, how about we select a few products we think our drag racing customers would be most interested in. And here's one of them...
Helicopter Racers Tape
This surface protection Helicopter Racers Tape is a super tough clear protective urethane tape that's almost invisible. And was designed to protect paint, vinyl, etc; that's prone to scratching, chipping, or weathering. It's easy to apply and has a removable backing so you can cut out shapes, or size it up to your specific needs first, then remove the liner and apply. Comes in a 30 foot roll, in either 2", 3" or 4" wide. Now it's easy to shop right here for all your Racers Tape needs! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Pit Pal Aluminum Channel Installation Kit
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And now, lightweight trailer doors can take advantage of the different cabinets and racks we have to offer by installing a brand new Pit Pal Aluminum Channel Installation Kit for extra added bracing! And because trailer doors don't have studs for mounting, you can easily install channels to the outer door frame with support screws or rivets. Once in place, the product mounts to the channels creating no added stress to your doors surface. Each kit comes with 2 channel strips that measure 48"W x 3.25"H and either 20 screws or 16 rivets... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Choose hardware preference in the "Options" menu below.
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Price
$95.00 Original price was: $95.00.$48.95Current price is: $48.95.
Total
$95.00 Original price was: $95.00.$48.95Current price is: $48.95.
Piston Pusher Tool
Another quality tool offered to help make bottom end work that much easier... This
Piston Pusher Tool is professionally made of the highest quality material and designed with a comfortable end handle and just the right angle in mind to push those used pistons and rods up and out of the block quickly and without any damage... Another "Nitrolink" quality pit tool to get the job done right!
"Nitrolink" carries a complete line of all Simpson Race Products!
Simpson Tow Straps
The next time you tow up to the lanes for the next round, why not let us set you up with one of these brand new high quality Simpson Tow Straps to make sure the job gets done properly! These straps measure 15 ft. long and feature a 2" wide webbing that's equipped with D-rings on both ends. These straps have been responsible for towing thousands of race cars into the winners circle over the years... And would be happy to do the same for your race team! Order yours right here!
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Price
$49.95 – $348.95Price range: $49.95 through $348.95
Total
$49.95 – $348.95Price range: $49.95 through $348.95
We offer a complete line of all MSD Products!
MSD Straight Spark Plug Wire Boots - Pro Mag 44
GoNitrolink.com is your one stop shop when you're ready to build that new set of plug wires as we're always right here to help! These MSD Straight Spark Plug Wire Boots - Pro Mag 44 work with your Pro Mag 44 running the common 8.5 mm size wire. This high quality product is made of silicone, providing an excellent resistance to heat and maximum protection against spark loss. Designed to last, you know you're hard earned $$$'s were well spent right here!
Choose a package of 10, or box of 100 total in the "options" menu below.
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Price
$49.95 – $95.59Price range: $49.95 through $95.59
Total
$49.95 – $95.59Price range: $49.95 through $95.59
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson Nomex Driver Headsock
Quality and comfort is offered right here with this brand new Simpson Nomex Driver Headsock for one more layer of extra added protection on race day! This one's NHRA "tech friendly" with SFI 3.3 tags and fits any full face helmet contour. It's Nomex base layer is moisture wicking and it comes in your choice of either the single, or dual eyeport opening in either white or black. Order top quality drivers equipment 24/7 right here at: GoNitrolink.com
Both styles are also available in CarbonX material if you prefer for the same price.
