Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson Stage 5 Billet 426 Hemi Heads
Check out this nice set of Alan Johnson Stage 5 Billet 426 Hemi Heads perfect for use on your Top Fuel Dragster, Nitro Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on. This slightly used set is in excellent shape and works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your standard deck fuel head style manifold. They're the .100 tall style and accept your 2.450 size intake and 1.925 exhaust valves, (not included). Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are already machined for o-rings and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Why Buy New??? So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $2195.00
Adjustable AN Fitting Line Wrench
Attention all Crew Chiefs... Before you tow up to the starting line, make sure you're fully prepared with an Adjustable AN Fitting Line Wrench just like this one. We've all seen it before... A Driver being told to shut off because of a loose fitting prior to a run. And more often than not, this style wrench might have made all the difference! Top quality craftsmanship second to none is offered right here with a finish and feel that make this handy pit tool the first one out of the tool box on race day. The anodized red finish makes it easy to spot. And it's thin light weight profile and handy end hook make it perfect for storing in your pocket or attaching it to your belt. It adjusts to a tight fit on any AN Fitting from -3 to -12 size. And is equipped with a handy Dzus Button Tool at the end of the handle that just eliminated having to carry yet another tool. So, you know how it works... Now that you've seen it... Guess what tool you'll wish you had the next time you go racing! Order yours today!
Priced to move at: Only $99.95
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 50 Plus Racing Oil
Thin may be "in" with some racing applications where fractional power improvements can be crucial. The first victim of fuel dilution is viscosity so Lucas 50 Plus Racing Oil adds dispersants along with enhanced zinc levels to minimize the effects of fuel dilution on engine component wear. At the extreme ends of drag racing where the Top Sportsman cars live, something as basic as sufficient oil pressure from this quality product could be the difference between heading to the winners circle, or heading home...
Sold by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 60 Plus Racing Oil
Developed for use on Alcohol Engines, the "Plus" is for the extra additives above and beyond those found in ordinary racing oils. Lucas 60 Plus Racing Oil contains special Lucas additives that resist breakdown as alcohol tends to act like a solvent that could effect lesser lubricants. All "Plus" Oils resist thinning out at high crank-case temperatures. And are fortified with extra zinc for severe racing applications. Reduced engine wear makes your crew chief look like a hero... So order today!!!
Sold by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Lucas Oil Products!
Lucas 70 Plus Racing Oil
Developed for use on Nitro and Alcohol Engines, the "Plus" is for the extra additives above and beyond those found in ordinary racing oils. Lucas 70 Plus Racing Oil contains special Lucas additives that resist breakdown and contamination from exotic fuels such as nitro and alcohol. All "Plus" Oils resist thinning out at high crank-case temperatures. And are fortified with extra zinc for severe racing applications, with the 70 plus having the highest zinc content. Reduced engine wear makes your crew chief look like a hero... So order today!!!
Sold by the pail, or by the drum.
Racers Discount Pricing Available!!! Call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Dragster Front Wheels - Polished
Ready to trip the beams at over 300 MPH, this brand new set of Sander Dragster Front Wheels - Polished to a brilliant shine is ready to offers your nitro, alcohol, or gas burning Dragster or Altered that perfect look you're going for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 17 x 2.2 size, one piece billet aluminum models and fit the popular Anglia spindles. They're NHRA "tech friendly" with SFI 15.2 tags included. And the great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. Another quality product to add to your team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Dragster Front Wheels - Black
How about another top quality product to add to your race team! This brand new set of Sander Dragster Front Wheels - Black anodized is ready to offer your nitro, alcohol, or gas burning Dragster or Altered that awesome stealth look you've been looking for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 17 x 2.2 size, one piece billet aluminum models and fit the popular Anglia spindles. They're NHRA "tech friendly" with SFI 15.2 tags included. And the great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. This set is ready to trip the beams at over 300 MPH and look mighty fine doing it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Funny Car Front Wheels - Polished
Ready to trip the beams at over 300 MPH, this brand new set of Sander Funny Car Front Wheels - Polished for that awesome look are ready to offer your nitro, alcohol, or gas burning Funny Car, Altered, or Pro Mod that perfect look you're going for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 15 x 3.5 size, one piece billet aluminum models and can be ordered to fit either Anglia, or Strange (larger bearing) spindles. They have previsions to accept your front disc brakes, if you're running them. And are NHRA "tech friendly" with SFI 15.2 tags included. The great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. Another quality product to add to your team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Funny Car Front Wheels - Black
How about another top quality product to add to your race team! This brand new set of Sander Funny Car Front Wheels - Black anodized and ready to offer your nitro, alcohol, or gas burning Funny Car, Altered, or Pro Mod, that awesome stealth look you've been looking for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 15 x 3.5 size, one piece billet aluminum models and can be ordered to fit either Anglia, or Strange (larger bearing) spindles. They have previsions to accept your front disc brakes, if you're running them. And are NHRA "tech friendly" with SFI 15.2 tags included. The great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. This set is ready to trip the beams at over 300 MPH and look mighty fine doing it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
