Inline Fuel & Oil Filter Chassis Clamp
If you're running one of the inline fuel or oil filters we have, then you'll probably want to take a look at this brand new Inline Fuel & Oil Filter Chassis Clamp for that professional, finished look your race team is known for! They're made of light weight billet aluminum and this style clamp bolts directly to your chassis frame to support the complete set-up. Specifically designed for these types of filters, this clamp securely holds everything in place, or makes it easy to remove your filter for service in between rounds. Longer style filters may require 2 clamps. These can be ordered to work with either the 2", or 2 1/4" diameter size filters. Just choose your chassis tube o.d. size, 1.000", 1.125", 1.250", 1.375", 1.500", 1.625", or 1.750 and we'll handle the rest!
Choose Filter Diameter & Tube Diameter needed in the "options" menu below.
Inline Fuel & Oil Filter D-Clamp
If you're running one of the inline fuel or oil filters we have, then you'll probably want to take a look at this brand new Inline Fuel & Oil Filter D-Clamp for that professional, finished look your race team is known for! They're made of light weight billet aluminum and this style clamp bolts up to most any durable flat surface, or tab strong enough to support the complete set-up. Specifically designed for these types of filters, this clamp securely holds everything in place, or makes it easy to remove your filter for service in between rounds. Longer style filters may require 2 clamps. These can be ordered to work with either the 2", or 2 1/4" diameter size filters, so we have you covered either way!
Choose Filter Diameter needed in the "options" menu below.
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Fuel Filters
The distance between your fuel tank and the injector is not always as clean as it needs to be... This problem can cause a wide range of issues including lean cylinders, fuel pump, or barrel valve damage, and so on! So, lets offer a wide variety of brand new System 1 Inline Fuel Filters to fit your specific race application. This quality component can be ordered to work with nitro, alcohol, or gas. And is offered in either a 2 inch, or 2 1/4 inch diameter, with a length choice of 6, 9, or 11, inches long. The removable filter element makes it easy to service in between rounds and see exactly what's not going into your fuel system. Yours can be assembled with either a 35-micron filter, excellent for use in high fuel demand carbureted applications and nominally flows 24 GPM. Or, the 75-micron filter that's ideal for use between the pump and barrel valve. Set up with your choice of AN -6, AN -8, AN -10, or AN -12 fittings. And available in either red or black. Order yours today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10
These Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10 - are 11/16" long, partially threaded, countersunk, with a phillips head. And can be used in a wide variety of racing applications. They offer a lighter weight alternative compared to standard steel hardware for the weight conscience racer. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
B&M "Pro Bandit" Gated Automatic Race Shifter
This next high quality component is offered to all racers out there running a Rear Engine Dragster equipped with a Powerglide! This B&M "Pro Bandit" Gated Automatic Race Shifter is definitely one of the nicest looking Shifters on the market with it's sleek design, CNC machined construction and race proven performance. It comes set up for a 2 speed powerglide transmission, however can also be converted to work with your 3, or 4, speed automatic transmission by simply replacing the hardened steel gate plate, applicable bracket and lever (sold separately) and it's forward and reverse shift pattern compatible. It measures 10"L x 1.3"W x 9.3"H and the compact lightweight design, mandatory reverse lock-out and rear cable exit check all the boxes for all our Rear Engine Dragster customers out there looking for a quality product, second to none! Please call: (916) 425-1427 with any questions, as we're here to help anytime!
Shifter cable, floor mounting brackets and hardware are all sold separately.
Price
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Total
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
Dzus Fastener Tool
Now here's a top quality Dzus Fastener Tool you'll be happy to reach for to help keep that new paint or wrap job on your race car free of damage or scratches! This quarter turn fastener tool is equipped with a rubber grip handle for a comfortable fit. It works well with all brands of fasteners, has a curved blade that helps prevent fastener damage and measures 6 1/4" total length. So give your screw drivers and fasteners a break... Order the correct tool for the job today!
