Simpson Disinfecting Helmet and Equipment Dryer
Attention all drivers... Keeping your expensive race gear in top condition is key to keeping you comfortable in the drivers seat so you're able to perform at your best. And this brand new Simpson Disinfecting Helmet and Equipment Dryer was developed to do just that! No racer looks forward to putting on a soaking wet, smelly helmet from the last round, however this handy compact unit eliminates that all together... But that's not all! It also comes complete with attachments to dry and sanitize your race gloves and driving shoes as well. This unit plugs into your standard 110v outlet and is equipped with a quick 20 minute ozone feature that cleans and disinfects for a healthier environment. And it provides a safe heat temperature designed specifically for the interiors of rated helmets to prevent mold, and mildew before it starts. It helps condition your helmet liner and cheek pads that degrade over time from perspiration and bacteria by slowing down the process, keeping your equipment in peak condition. Now you can quickly refresh your gear in between rounds, so you're able to focus on one thing... Winning!
Racers helping racers do what they do best! GoNitrolink.com
A NOTE ON OZONE:
Ozone is used widely for sterilizing; this dryer generates ozone by the corona discharge method. Ozone is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations of as little as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation. Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation; it is used to deodorize air, purify water, disinfect kitchen tools and treat industrial wastes. Although ozone is widely used in industry and commerce the ozone layer, a portion of the stratosphere, is beneficial: It prevents damaging ultraviolet light from reaching the Earth's surface. This same oxidizing property, however, causes ozone to damage mucous and respiratory tissues, so for safety and comfort purposes, the manufacturer recommends using the dryer and sterilizer in a space with adequate ventilation, and stay away from it while it is disinfecting objects with ozone.
Helmet & Gloves in the photos are also available and sold separately.
"Nitrolink" offers a complete line of all Williams Race Products!
Williams BBC Aluminum Valve Covers
If the Big Block Chevy is your weapon of choice on race day but it could stand a little dressing up, then lets set you up right here with a brand new pair of Williams BBC Aluminum Valve Covers. And check out the craftsmanship, as this set is 100% tig welded and comes equipped with 3/8" size billet rails that not only help provide a tight secure seal. But also assist in retaining flatness even after repeated removal and installation. They can be ordered in either a tube, or tubeless mounting style and can also include added options such as spring oilers, oil fill cap, breather tubes, or weld bungs at an additional cost. Call today and we'll be happy to get a set started just for you! Price starts at: $280.00 set.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" carries a complete line of all Portatree Products!
Portatree Eliminator Next Gen Practice Tree
Attention all Drivers!!! Keep those lightning quick reflexes razor sharp and ready to mow down the tree on the starting line! This Portatree Eliminator Next Gen Practice Tree is the ultimate in reaction time training and perfect to work out on while your getting your thoughts together in the race trailer lounge, or sitting in the tow vehicle waiting in the staging lanes. It comes complete with 2 hand switches, 12V wall adapter, wire table top stand and handy carrying case. It utilizes "outdoor bright" LED lights and measures 8.75" high, x 6.25" wide. Optional foot pedals, vehicle connections, etc; can be added later and are sold separately. Many races are won on the starting line and practice makes perfect, so don't be late!!! Order one here today!
Ultra-Sturdy Cylinder Head Holder
One more specialty tool right here to help make your job a little easier! This durable Ultra-Sturdy Cylinder Head Holder is one of those items that if you use it once, you'll wonder how you ever managed without it. This one fits most any style cylinder head and holds it securely at a 60° angle, perfect for any type of service. And the 3-piece design utilizes a handy tie rod on one side to help prevent tipping. You're only a couple clicks from having one on the way, so order today!
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
Valve Lapping Sticks
Or, if you prefer to keep everything old school, then "Nitrolink" is here to help with one of these brand new Valve Lapping Sticks to make sure you're ready for the next round! No rocket science here, just a good quality tool that's comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8" long and comes equipped with a small and large, (1 1/8" and 1 3/8") cup on each end. Specialty pit tools available 24/7 right here on our website!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
