Cylinder Head Stands
If you're looking to streamline your racing operation, then paying close attention to even the small task challenges usually translates into a productive weekend on the race track! And this handy set of brand new Cylinder Head Stands can certainly help in that department! No bolts, clamps or adapters required with this 2 piece set. Their light weight aluminum construction and slip resistant neoprene covered rails makes this set perfect for use in your pit area. And they're compact size allows them to stow away practically anywhere in your race trailer or back at the shop. Just another "Nitrolink" specialty tool to help keep things running smooth on your team!
We offer a complete line of all Pit Pal products!
Floor Jack Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's eliminate the possibility of costly damage to your race car during transport with a brand new Floor Jack Holder like this one to help keep yours safe, secure and out of the way! This one's made of durable .090 tig welded aluminum and equipped with a fully enclosed back and bottom. It measures 17.5"W x 24.25"H x 5.5"D and ready to be pressed into service right out of the box... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Floor Jack not included.
Dragster Nose
Ready to start on that Dragster project out in the race shop yet? Well, then this next item could be exactly what you've been looking for... And let's save you both time and money buying it right here!!! This slightly used Dragster Nose is in nice shape, made of fiberglass, weighs 3 lbs. and measures: 30 3/8" long by 10 1/4" tall in the back. And 14" inside at it's widest point. We'll price this one accordingly, as it has a small crack that can easily be repaired on one side right at the bottom. After that, choose your paint color and get ready for the big day! Unmatched Customer Service, right here! GoNitrolink.com
Vintage Keith Black Dual Oil Filter Adapter
Pure nostalgia offered right here with this awesome Vintage Keith Black Dual Oil Filter Adapter that's sure to help all our Cacklefest customers out there meet their requirements to only install the exact components that were used back in the day! This one's slightly used, made of cast aluminum, in nice shape and free of any damage or repairs. And equipped with a set of fittings ready to work with your -12 size lines. Filter surface diameter measures
3 1/4" round edge to edge and this one's set up to work with any brand of the smaller style spin-on oil filters (not included) made to fit that diameter. Includes everything you see in the photos. And if you're looking for more vintage items just like this one, then keep checking back... There's more on the way! GoNitrolink.com
Set-Back Blower Snout Strut Kit
Another quality component specifically designed to deliver both performance and durability!!! And that's exactly what you'll find right here with this brand new Set-Back Blower Snout Strut Kit that offers all you racers running the longer style blower snout extra added support along the bottom to help avoid costly damage during competition. It's the same style used by the majority of the top nitro teams on tour because it allows you to quickly remove the supercharger without having to worry about unbolting the struts, due to the super trick bracket design that fits over your idler bracket. All 4 brackets included are made of billet steel and the 2 adjustable arms are billet aluminum. PLEASE NOTE: This set-up was designed specifically to work with the snout clamp style belt guard/starter bracket and angled set back style idler bracket only. Give us a call if you have any questions, as we're always happy to help! Race, win, repeat... GoNitrolink.com
Piston/Rod Rack
No need to set those expensive Pistons & Rods on the work bench any longer! Why risk picking up dirt, metal shavings, etc; before they're installed? This Piston/Rod Rack is definitely the answer!!! Perfect for holding your complete set of Pistons & Rods safely while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. And it's equipped with a handy bottom drip tray for easy clean up. Now you can transport complete spare sets to a from the race track easily. GoNitrolink.com for all your specialty pit tool needs!
Piston / Rod Rack
It's strong, it's durable and it's ready to offer your race team, trailer, or race shop that professional look it deserves! This high quality Piston/Rod Rack is brand new and perfect for holding your complete set of pistons & rods while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. It measures 22 1/2" long by 11" wide by 8 1/2" tall. The top is equipped with a vinyl coating to prevent piston damage. And it also has an easy to clean drip tray on the bottom. Pretty cool!!! And works great for storing complete sets in your trailer during transport. Don't lay those expensive pistons & rods on the work bench or elsewhere and risk picking up dirt, metal shavings, etc; before they're installed. You're only a few clicks away, to get one on the way!
Price
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Total
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
Price
$335.95 Original price was: $335.95.$220.95Current price is: $220.95.
Total
$335.95 Original price was: $335.95.$220.95Current price is: $220.95.
Pro Series AN Wrench Set
Specifically designed to handle the extreme demands that any pro team on tour has to offer... And perform just as awesome as they look! This complete anodized
Pro Series AN Wrench Set is made by XRP and works with the swivel nuts on hose ends. Each one is color coded to take the guess work out of which wrench fits where. And all are designed with fully radiused edges for a comfortable grip. This quality set is made of heat treated 6061 aluminum alloy for strength and durability. And includes sizes: -3, -4, -6, -8, -10, -12, -16 & -20. Now you know exactly where to go for all your quality pit tool needs! GoNitrolink.com
Price
$324.95 Original price was: $324.95.$224.95Current price is: $224.95.
Total
$324.95 Original price was: $324.95.$224.95Current price is: $224.95.
Pro Series AN Wrench Set
Specifically designed to handle the extreme demands that any pro team on tour has to offer... And perform just as awesome as they look! This anodized Pro Series AN Wrench Set is made by XRP and work with the swivel nuts on hose ends. Each of the (8) wrenches is color coded to take the guess work out of which wrench fits where. And all are designed with fully radiused edges for a comfortable grip. This quality set is made of heat treated 6061 aluminum alloy for strength and durability. And includes sizes: -3, -4, -6, -8, -10, -12, -16 & -20. Now you know exactly where to go for all your quality pit tool needs! GoNitrolink.com
Manifold Lapping Plates
Keep that supercharger on your race car performing at it's best with one of the nicest Manifold Lapping Plates on the market to help keep it flat and true! This heavy duty high quality specialty tool is brand new and the perfect item to have at your race shop, or in your pit area on race day to help your manifold provide a nice even surface for a complete seal. This one's made of billet aluminum and comes complete with 1 disposable self adhesive sheet of sand paper. (Extra sheets sold separately). It measures 1" thick and is equipped with 2 comfortable handles to help deliver a consistent result. It stores away nicely in your race trailer or shop and ready to go to work right when you need it most! Top quality right here! GoNitrolink.com
Extra sheets of sand paper are also available right here on our website.
Valve Lash Adjusting Torque Wrench
How about a high quality precision Valve Lash Adjusting Torque Wrench tool all in one!!! It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. Preset to 22 lbs, it can be customized up to 26 lbs, and comes complete with the following: 1/8, 5/32, & 3/16" Hex Keys. And it accepts any standard 3/8 drive socket (not included). Take one of these to the race track once... Then wonder how you ever managed without one! GoNitrolink.com for all your specialty pit tool needs!
