Analog Tire Gauge - 0-30 PSI
This brand new top quality Analog Tire Gauge - 0-30 PSI is exactly what you'll be looking for to help set up those rear slicks with precision accuracy! This one's the 0-30 psi model that offers a slightly wider range reading in 1/2 lb. increments. It's equipped with a larger 2 1/2" glow in the dark face for easy readability. It has a 1/2 lb./2% accuracy and holds your pressure reading until released. It features a protective gauge bumper, high flow pressure release button, internal gauge damper for a more accurate reading and longer life. And a handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Also available in 0-15, 0-40, 0-60, or 0-100 PSI...
Pro Series Digital Tire Gauge
Order this brand new Pro Series Digital Tire Gauge in several PSI range options, to include 0-25 psi, 0-60 psi, or 0-125 psi for a more specific, super accurate reading! This gauge features all the options you would expect in a high quality tool to include a larger 2 1/2" face with back lights. Easy-to-read digital numbers that read within .3% accuracy. An auto-off feature to save battery life, protective external bumper, dual air release buttons on 0-25 and 0-60 for even faster setting at lower pressures. And a handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck included to make sure we have you're covered. We'll also include a hard case to keep it safely stored during transport. And 2 AAA batteries so it's ready to tow to the lanes when you are... Helping your team get to the winners circle, one run at a time! GoNitrolink.com
Choose PSI range in the "options" menu below.
Pro Analog Tire Gauge - 3 1/2" Size
And if you're looking for an even larger gauge size, then check out this brand new top quality Pro Analog Tire Gauge - 3 1/2" Size that's sure to check all the boxes! It's offered in several PSI range options, to include 0-15 psi, 0-30 psi, 0-40 psi, or 0-60 psi for a more specific, super accurate reading! The 0-15 and 0-30 read in 1/4 lb. increments. And the 0-40 and 0-60 read in 1/2 lb. increments. It's equipped with a larger 3 1/2" glow in the dark face for easy readability. And has an accuracy rating between 1/4 lb./2% to 2% depending on the gauge you choose. And this style holds your pressure reading until released. It features a protective gauge bumper, dual bleed air pressure release buttons, internal gauge damper for a more accurate reading and longer life and a hard case to keep it safely stored during transport. A handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is also included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Available in 0-15, 0-30, 0-40, or 0-60 PSI...
Choose PSI range in the "options" menu below.
Analog Tire Gauge - 0-15 PSI
This brand new top quality Analog Tire Gauge - 0-15 PSI is exactly what you'll be looking for to help set up those rear slicks with precision accuracy! This one's the 0-15 psi model that offers a smaller range reading in 1/4 lb. increments. It's equipped with a larger 2 1/2" glow in the dark face for easy readability. It has a 1/4 lb./2% accuracy and holds your pressure reading until released. It features a protective gauge bumper, high flow pressure release button, internal gauge damper for a more accurate reading and longer life. And a handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Also available in 0-30, 0-40, 0-60, or 0-100 PSI...
"Nitrolink" offers a complete line of all Weld & Sander products!
Weld & Sanders 16x16 Liner Wheels
Are you having an issue with your older set of rear wheels not passing tech? Then get ready to save some cash, because one call does it all right here!!! Check out a brand new set of either Weld & Sanders 16x16 Liner Wheels that can be ordered in either polished, or black anodized for just the right appearance you've been looking for! These are the non-beadlock style, that are NHRA "tech friendly" with new SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And available in multiple offset/backspace sizes to meet your needs. If you have any further questions, just give us a call as we're here to help anytime! Racers helping Racers do what they do best... For Less! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Official Nitrolink Racing Leather Sleeve Jackets
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
You won't be disappointed with the quality and style of these Official Nitrolink Racing Leather Sleeve Jackets that are being offered right here before you can even get them at the race track... These custom embroidered top of the line heavy jackets are the "real deal" and not the common less expensive lighter style we're all familiar with. They're made in the U.S. and perfect for those cool winter nights waiting in the staging lanes. They offer a black wool body, genuine leather black sleeves, outside pockets, pleated lining and an inside pocket. And include your choice of either the Dragster or Funny Car logo stitched on the front. And they're available in all the popular sizes. With proper care, these comfortable high quality jackets will last for years... Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
Choose either Dragster or Funny Car logo and size in the "options" menu below.
Have a sizing questions? Call us at: (916) 425-1427 anytime!
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
Chassis Stabilizer - Round
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Round style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the popular 18" diameter round style, manufactured from durable rubber. Its sleek design and 1.75" deflated height allows it to slide under the lowest ground clearance vehicles and it can inflate to an adjustable maximum height of 10". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Rectangular 4" lift style also available.
Set-Back Blower Snout Strut Kit
Another quality component specifically designed to deliver both performance and durability!!! And that's exactly what you'll find right here with this brand new Set-Back Blower Snout Strut Kit that offers all you racers running the longer style blower snout extra added support along the bottom to help avoid costly damage during competition. It's the same style used by the majority of the top nitro teams on tour because it allows you to quickly remove the supercharger without having to worry about unbolting the struts, due to the super trick bracket design that fits over your idler bracket. All 4 brackets included are made of billet steel and the 2 adjustable arms are billet aluminum. PLEASE NOTE: This set-up was designed specifically to work with the snout clamp style belt guard/starter bracket and angled set back style idler bracket only. Give us a call if you have any questions, as we're always happy to help! Race, win, repeat... GoNitrolink.com
Can be certified with either SFI 15.3 or 15.4 tags!!!
Used Sanders 16x16 Beadlock Rear Racing Wheels
In stock and ready to ship out today!!! Check out this nice set of Used Sanders 16x16 Beadlock Rear Racing Wheels that's sure to save you big time not having to buy new elsewhere!!! They come complete with the upgraded drive hub centers, making them legal for both NHRA Top Fuel Dragster or Nitro Funny Car competition. However, they can also be used on your car, even if your rear end is not equipped with the drive hub set up. This set has the popular 5 on 5 1/2 bolt pattern, with a 4 1/2" offset/backspace. And utilize 24 bolts total on the outside, as well as the inside of the beadlock rings. The black anodized finish on both wheels is in good shape and both still have a nice shine. Black anodized/profiled centers are also in good shape with only minor nicks and scratches. Stud holes are in great condition with no cracks or oblong. Inner and outer beadlock rings are scalloped to reduce weight and also get the thumbs up. Both wheels have never been bent up, welded on, or repaired. And as usual, you will find with this set not being brand new, your common normal wear with slight nicks & scratches throughout. And everything looks good to go... So, if you're tired of waiting months for delivery on a set of rear racing wheels elsewhere, then your wait is over!!! Save more, race more, repeat... GoNitrolink.com
Price
$69.95 – $99.95Price range: $69.95 through $99.95
Total
$69.95 – $99.95Price range: $69.95 through $99.95
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson Nomex Driver Headsock
Quality and comfort is offered right here with this brand new Simpson Nomex Driver Headsock for one more layer of extra added protection on race day! This one's NHRA "tech friendly" with SFI 3.3 tags and fits any full face helmet contour. It's Nomex base layer is moisture wicking and it comes in your choice of either the single, or dual eyeport opening in either white or black. Order top quality drivers equipment 24/7 right here at: GoNitrolink.com
Both styles are also available in CarbonX material if you prefer for the same price.
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson CarbonX Driver Socks
Attention All Drivers!!! Both top of the line quality and comfort are offered right here with a brand new pair of Simpson CarbonX Driver Socks for more extra added protection on race day. These come complete with SFI 3.3 tags and are knitted from patented CarbonX yarn and flame-resistant, super-washed merino wool. They're equipped with a reinforced toe, heel and cushioned sole for extra durability. And available in one color black, with one size fitting most. Drivers helping Drivers do what they do best! GoNitrolink.com
