Another BRAND NEW item... Without the brand new price!!!
CP 426 Hemi Coated Nitro Pistons
How about another brand new product, without the brand new price tag! This set of (10) brand new CP 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.715 compression height. Ring groove sizes are as follows:
Top = .0745, Second = 1/16", Oil ring = 3/16" size. We only have one set available, so click on "buy now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson 10' Skyjacker "Sportsman" Chute
Check out this BRAND NEW Simpson 10' Skyjacker "Sportsman" Chute for use on your alcohol, or gas burning Dragster, Altered, Super Comp Dragster Pro Gas Doorslammer, Show Car, or ??? This one's the Sportsman 10' Crossform model with the black nylon pack for all cars up to 200 MPH. It's equipped with the nylon lines commonly used on the sportsman style Chutes, instead of the heavier 3/4" size lanyard straps that are used on the heavier duty Nitro/Alcohol Chutes. Canopy colors come in red, blue, or black. And it comes complete with a pack, aluminum back-plate and pilot chute included for a complete package. Release cable not included. So here's the perfect opportunity to replace that old worn out Chute you're currently running on your race car. Or, grab one up for spare!
Choose either Red, Blue, or Black in the "options" menu below.
Price
$445.00 – $620.00Price range: $445.00 through $620.00
Total
$445.00 – $620.00Price range: $445.00 through $620.00
We offer a complete line of all Pit Pal products!
Aluminum Loading Ramps
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And check out the craftsmanship on this brand new set of Aluminum Loading Ramps that are ready to make your life a whole lot easier on race day! They're offered in 3 different sizes: 36" long, 60" long, or 72" long x 14" wide. All are made from sturdy .125 aluminum Tig-welded A-shaped channel and are sold as a pair. They have a fabricated height of approx. 4 inches. And feature traction embossments, heavy duty hinges that are zinc-yellow plated and rivets. And flip up easily when not in use... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Please note: Due to the size of this product, please call: (916) 425-1427 before you order so we can go over the best shipping options.
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
Another BRAND NEW item... Without the brand new price!!!
New 426 Hemi Coated Nitro Pistons
Are you ready to score big time on a set of (10) New 426 Hemi Coated Nitro Pistons made by Diamond Pistons. And if you're looking for the 4.187 bore size then it's your lucky day! This complete set, plus two spares is ready to accept your 1.156" pin size, with a 1.600 compression height and standard ring grooves. This style piston can be used in Nostalgia Funny Car, Fuel Altered, or Drag Boat applications. We only have one set available, so click on "buy it now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Price
$69.50 – $595.00Price range: $69.50 through $595.00
Total
$69.50 – $595.00Price range: $69.50 through $595.00
NGK 6061-10 Spark Plugs
Attention in the pits!!! Let's kick off the brand new 2024 racing season by offering your race team this money saving deal on Spark Plugs!!! We have a limited supply of these brand new NGK 6061-10 Spark Plugs in the original boxes and ready to ship out immediately! This is the exact plug of choice for many of the nitro Dragster & Funny Car teams on tour... And if this is your size and brand, then today's your lucky day! Check out the awesome price of only $5.95 each when you buy 100 or more, making right now the perfect time to stock up and save! Racers helping racers do what they do best! GoNitrolink.com
Sold as a package deal, (100 plugs total = $5.95 each).
Sold by the box, (10 plugs total = $6.95 each).
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Stealth Coated Titanium Intake Valves
Our website makes it simple to replenish your spare parts inventory and save a bundle on select items not having to buy new elsewhere! And here's a set of slightly Used Stealth Coated Titanium Intake Valves with another budget friendly price tag, to keep a little extra money in your pocket, for a change! This set of 8 titanium valves measure 2.450 diameter, with a 5.620" length. And are equipped with a 11/32" stem and a .250 tip, with a beadlock groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Save money, save time, GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Price
$485.00 – $575.00Price range: $485.00 through $575.00
Total
$485.00 – $575.00Price range: $485.00 through $575.00
We offers a complete line of all Dan Olson Race Products!
Dan Olson BBC Aluminum Valve Covers
Attention all Big Block Chevy Race Teams! "Nitrolink" is always happy to help make your engine look as good as it performs with a pair of brand new Dan Olson BBC Aluminum Valve Covers. Just take a look at the tig welding and you'll see a quality product that's equipped with 3/8" size billet rails that were designed to help provide a flat secure seal even after repeated installation and removal. They can be ordered standard, or with rail oilers at a slight additional cost if you choose. And this style is sure to offer that clean, finished appearance you've been looking for!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Total
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Another BRAND NEW item... Without the brand new price!!!
New U.S. Gear Ring & Pinion Set
"Supercharged Savings" right here at GoNitrolink.com with this New U.S. Gear Ring & Pinion Set. And if you're looking for a Pro Gear with a 4.11 ratio, then get ready to save some hard earned cash! This one works with your 9.5" size ford style rear ends and is brand new and ready to install. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And check out the racer friendly price tag on this new product... Click on "buy now" before it's gone!
